March 28, 2024, 05:26:26 PM
Forum Rules: Read This Before Posting


Topic: Calculating coupling constants (J) in proton NMR  (Read 196262 times)

0 Members and 1 Guest are viewing this topic.

Offline mobfesk2

  • Regular Member
  • ***
  • Posts: 19
  • Mole Snacks: +0/-0
Calculating coupling constants (J) in proton NMR
« on: April 02, 2008, 04:38:41 PM »
Hi chem forumers,

I have a question about coupling constants (J) in proton NMR.

Am I right in calculating J as follows:

1. For a doublet = the difference between the frequency of the 2 peaks x frequency of NMR machine e.g. 400MHz

2. For a triplet = the difference between the peak frequencies of the outer 2 peaks (not middle one) x 400MHz

3. For a double doublet = don't know how to explain this one! Maybe best to look at the pic

4. Singlet = No J value can be calculated as it is only 1 peak

Any other types of peak I've missed out???

Also, what would be the best way to show these constants and chemical shifts in a thesis???

Thank you very much for any suggestions





Sugar chemistry... sweet or sour?

Offline DavidW

  • Chemist
  • Regular Member
  • *
  • Posts: 21
  • Mole Snacks: +0/-0
Re: Calculating coupling constants (J) in proton NMR
« Reply #1 on: April 02, 2008, 07:05:09 PM »
1. Yes.

2. Not quite.  For triplet, you take the difference in ppm between the *middle* peak and an outer peak, and multiply by Mhz.

3.  The way you drew the red lines is the correct way to calculate the two J values.

4. Yes

5. Well there are lots of other variations (double of triplets, etc.), but they are more or less the same idea.

Offline movies

  • Organic Minion
  • Retired Staff
  • Sr. Member
  • *
  • Posts: 1973
  • Mole Snacks: +222/-21
  • Gender: Male
  • Better living through chemistry!
Re: Calculating coupling constants (J) in proton NMR
« Reply #2 on: April 03, 2008, 04:38:25 PM »
For number one, yes, but make sure you are looking at the frequency in ppm when you multiply by the spectrometer frequency.  For most spectrometers you can also have the chemical shift displayed in Hz, in which case you can just calculate the difference between the two signals.  This is more accurate because the ppm value is usually rounded to a tenth or hundreth of a ppm, which becomes significant when you multiply by 400!

For number three, do you really mean a doublet of doublets, or do you mean a quartet?  For a quartet (a resonance split by three other equivalent nuclei) there would be only on J value.  For a doublet of doublets, you would have two, as you indicated in the image.

Offline DavidW

  • Chemist
  • Regular Member
  • *
  • Posts: 21
  • Mole Snacks: +0/-0
Re: Calculating coupling constants (J) in proton NMR
« Reply #3 on: April 07, 2008, 05:57:02 PM »
Good point Movies, I didn't realize he could be referring to a quartet and not a doublet of doublets.

Offline bluepanda

  • Very New Member
  • *
  • Posts: 1
  • Mole Snacks: +0/-0
Re: Calculating coupling constants (J) in proton NMR
« Reply #4 on: October 23, 2012, 07:13:20 PM »
how does one know when to calculate J values?

Offline Babcock_Hall

  • Chemist
  • Sr. Member
  • *
  • Posts: 5592
  • Mole Snacks: +319/-22
Re: Calculating coupling constants (J) in proton NMR
« Reply #5 on: October 23, 2012, 08:32:28 PM »
I calculate them to try to decide which atoms are coupled to which other atoms.  Sometimes having the value of the coupling constant can sort this out.  I am not sure that I am answering your question.

Offline PhDoc

  • Full Member
  • ****
  • Posts: 133
  • Mole Snacks: +22/-0
  • O-Chem Prof
    • PH.D. Organic Chemistry Tutor
Re: Calculating coupling constants (J) in proton NMR
« Reply #6 on: October 23, 2012, 09:04:35 PM »
Babcock_Hall, by any chance did you go to the University of Wisconsin?
O-Chem Prof

Sponsored Links