April 18, 2024, 02:19:12 PM
Forum Rules: Read This Before Posting


Topic: Catalysts and kinetics  (Read 7948 times)

0 Members and 1 Guest are viewing this topic.

Offline BFGuru

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Catalysts and kinetics
« on: April 26, 2009, 08:20:45 PM »
Hi all.  This is my first post here and I'm hoping someone can help at least point me in a direction without giving me the answer.

I can't seem to find the equation needed to solve this problem and I'm fine working the math, but the actual equation is lost to me.  I've worked it a few ways to no avail so I figure it's time to find some help

Suppose a catalyst lowers the activation barrier of a reaction from 125 kJ/mol to 55 kJ/mol.  By what factor would you expect the reaction rate to increase at 25 celsius? (Assume that the frequency factors for the catalyzed and uncatalyzed reactions are identical.)

Any help anyone can give me would be great.  I'd be glad to share what I have thus far if you like.
Thanks!

Offline Schrödinger

  • Chemist
  • Sr. Member
  • *
  • Posts: 1162
  • Mole Snacks: +138/-98
  • Gender: Male
Re: Catalysts and kinetics
« Reply #1 on: April 27, 2009, 03:43:38 PM »
i think i can tell u wat 2 use....

Rate = P*Z*e^(-Eact/RT)
T = temp
e = Napier's no.
R = gas const.
P = probability factor
Z = collision freq.(i am not too sure.)
"Destiny is not a matter of chance; but a matter of choice. It is not a thing to be waited for; it is a thing to be achieved."
- William Jennings Bryan

Offline themedicinebudha

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Re: Catalysts and kinetics
« Reply #2 on: July 03, 2011, 03:31:55 PM »
Try using the following equation:

k = Ae^(-Ea/RT)

After performing the necessary unit conversions, you would plug the data into the equation for each circumstance....
that should get you started!

Sponsored Links