Chemical Forums

Please login or register.

Login with username, password and session length

Sponsored links

Pages: [1]   Go Down

Author Topic: Under heat glowing mark on diamond surface!!?  (Read 2283 times)

0 Members and 1 Guest are viewing this topic.

Ramzi Kassab

  • Very New Member
  • *
  • Mole Snacks: +0/-0
  • Offline Offline
  • Posts: 1
Under heat glowing mark on diamond surface!!?
« on: September 12, 2017, 11:45:03 PM »

Hi every body
Im working in acompany that work in oil well bits repair,
The cutting elemint is a Polycrystalline diamond cutters (PDC)  its a circular piece of diamond supported on tungsten carbide substrate , if the cutting edge cracked we rotate it under heat up to 1100° F to expose agood edge .
The problem here that under that temperature the glowing prevent us to see clearly and many times we redo that work.
  l have an idea to put asmall mark on the cutting diamond  or asubstrate ,what is the sutable material for this job?
Must not react with the diamond or substrate
And glow in adifference color at that temp. (Not red)
Thank you all.

Pages: [1]   Go Up

Mitch Andre Garcia's Chemical Forums 2003-Present.

Page created in 0.169 seconds with 23 queries.