May 06, 2024, 07:02:11 PM
Forum Rules: Read This Before Posting


Topic: Please help identifying analytical chemistry instrument  (Read 7524 times)

0 Members and 1 Guest are viewing this topic.

kingfastlane

  • Guest
Please help identifying analytical chemistry instrument
« on: September 07, 2005, 03:56:16 PM »
I found this thing, and I want to sell it on ebay, but the problem is I don't know what it is! It's picture is attached to this post. Please let me know what you think it is. Thanks    Andy

Grumples

  • Guest
Re:Please help identifying analytical chemistry instrument
« Reply #1 on: September 07, 2005, 04:36:04 PM »
have you looked for a brand name? I think I see some marking on the front lower right corner- that might be it.  If you find one, just try googling it.
« Last Edit: September 07, 2005, 04:37:05 PM by Grumples »

Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re:Please help identifying analytical chemistry instrument
« Reply #2 on: September 07, 2005, 04:41:09 PM »
You probably shouldn't sell products that you have no clue what they are for, how to use them, or if they even work.
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

kingfastlane

  • Guest
Re:Please help identifying analytical chemistry instrument
« Reply #3 on: September 08, 2005, 06:56:58 AM »
Uhh, thanks for the advice mitch, and no, that symbol may be a brand name's symbol, but it doesn't actually say anything. Thanks for the thought though. Anyone else have any ideas?

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27675
  • Mole Snacks: +1801/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re:Please help identifying analytical chemistry instrument
« Reply #4 on: September 08, 2005, 08:06:36 AM »
HAAKE (well, the picture is not pretty clear, perhaps I am misreading it) is a German surname, there are lots of firms with HAAKE in the name. Try google, perhaps you will be able to find something.

Judging from connectors and switches it looks like something built in sixties.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline ATMyller

  • Chemist
  • Full Member
  • *
  • Posts: 223
  • Mole Snacks: +31/-6
Re:Please help identifying analytical chemistry instrument
« Reply #5 on: September 08, 2005, 08:22:46 AM »
It's a Haake Buchler water/oilbath with cooling unit. looks like the temperature controller is missing so it's not much on it's own.
Chemists do it periodically on table.

kingfastlane

  • Guest
Re:Please help identifying analytical chemistry instrument
« Reply #6 on: September 08, 2005, 09:37:07 AM »
Also, if this helps, that symbol someone mentioned earlier says on it "Haake Gebruder Berlin", so I googled that and the first site contained this in it:

Rheological Measurements
A viscometer (Gebruder Haake, Model RV2, Berlin, Germany) with a rotating inner cylinder and a stationary outer cylinder (Model NV ST, Gebruder Haake, Berlin, Germany) was used for the viscosity measurements.

Does this mean it's a viscometer?  Sorry for my ignorance.

rak

  • Guest
Re:Please help identifying analytical chemistry instrument
« Reply #7 on: September 27, 2005, 06:20:45 AM »
Its definitely an oil circulator and a very old model at that. The viscometer portion is not there in the photograph at least. Generally viscometers are used in characterisation of polymers(shear rate Vs viscosity etc).

Sponsored Links