Chemical Forums
Specialty Chemistry Forums => Citizen Chemist => Topic started by: Blue Humour on December 18, 2015, 05:59:35 AM
-
I would like to store Acetone in a sealed paint tin at 40C. Should I be worried about pressure build up?
I'm stuck on how to figure out whether this is an explosion risk...
-
Does the paint can have a screw top or press down lid?
Just some information
From WIKI
https://en.wikipedia.org/wiki/Acetone (https://en.wikipedia.org/wiki/Acetone)
For Acetone
Boiling point
56–57 °C; 133–134 °F; 329–330 K
Vapor pressure
9.39 kPa (0 °C)
30.6 kPa (25 °C)
374 kPa (100 °C)
2.8 MPa (200 °C)
From elsewhere on the Internet base on GOOGLE search
acetone vapor pressure calculator
http://www.ddbst.com/en/EED/PCP/VAP_C4.php (http://www.ddbst.com/en/EED/PCP/VAP_C4.php)
I estimate vapor pressure of acetone at 40 °C
is about 46 kPa
And from WIKI
https://en.wikipedia.org/wiki/Atmospheric_pressure (https://en.wikipedia.org/wiki/Atmospheric_pressure)
sea level standard atmospheric pressure 101.325 kPa
-
I would like to store Acetone in a sealed paint tin at 40C. Should I be worried about pressure build up?
I'm stuck on how to figure out whether this is an explosion risk...
How much acetone?, Size of container?
Generally solvents should be stored at room temperature or below. With acetone at 40°C you are only 16°C below the boiling point so I would say that you can expect a significant pressure build up.
So this is a safety risk. Expect significant degassing if you open the tin, this could cause a static discharge and hence an explosion.