Chemical Forums

Chemistry Forums for Students => Analytical Chemistry Forum => Topic started by: Elijak on June 10, 2019, 06:47:51 AM

Title: Aluminium balance/content in my distillation system in PPM
Post by: Elijak on June 10, 2019, 06:47:51 AM
I am trying to understand Aluminium balance/content in my distillation system. I distill a liquid that contains 2ppm of Al in a presence of a solid that contains 1ppm of Al (the solid will dissolve in in the liquid, vessel I). After distillation, I obtained new solid (solid II) and the distilled liquid (liquid II) that contain 15ppm and 0.5ppm of Al, respectively. I want to understand if my distillation setup itself can introduce some Aluminium impurities. Can I reply yes, based on a simple calculation that 1ppm+2ppm (vessel 1)<15ppm + 0.5ppm (solid II + Liquid II) or I should take into account amounts of the reactants and products that were used so it's more complex task to answer my question? I would expect to have less impurities in solid II and Liquid II after distillation if there is no extra contamination form the setup.
Title: Re: Aluminium balance/content in my distillation system in PPM
Post by: billnotgatez on June 10, 2019, 09:41:44 AM
We only post a given question once on the forum.
This is a forum policy.
Click on the link near the top center of the forum page.
Forum Rules: Read This Before Posting.
http://www.chemicalforums.com/index.php?topic=65859.0 (http://www.chemicalforums.com/index.php?topic=65859.0)

Topic locked here
see
https://www.chemicalforums.com/index.php?topic=100193.0 (https://www.chemicalforums.com/index.php?topic=100193.0)