Chemical Forums
General Forums => Generic Discussion => Topic started by: johner on September 02, 2019, 03:15:06 AM
-
I'm looking for material that is pliable at first and after exposure to something, be it air, water, electricity, force whatever, will harden up preferably in a matter of seconds up to minuets. does anybody know if such a material can be found?
-
Welcome, johner!
Many materials for sure. Seconds to minutes is the difficult restriction.
If you can heat said material to deform it, it's called forging in the case of metals. Many polymers react the same way. Or if the material is molten then solidified, it's called casting.
Some alloys get harder by heat treatment, which may be fast if the part is thin. The treatment can be just heat, or quenching for some steels, or intense cold. Some alloys, known for rivets, are kept in a fridge up to forming, then ambient temperature hardens them; a bit more warmth would accelerate this.
Other materials can hold the given shape by a fast chemical reaction, for instance water absorption in quick-setting cement. Variants exist but their reaction speed is unclear to me; alumina powder is sold for the same way of use.
Some materials harden by baking, like clay. If thin enough, with a pre-heated oven, minutes seem within reach.
Some resins and glues harden within minutes or seconds. Give the resin a shape, let it harden. Or give some fibrous material a shape, impregnate with a resin, let harden. Mixing can start the reaction, or air humidity, or light, or adding a catalyst, and so on.
Dry sand can be poured, but if you compact it, it gets some resistance.
Some effects are a little bit more esoteric. Even pure water can freeze reversibly slightly above 0°C with the help of an electric field. Research labs certainly have materials usable at varied temperatures, and effects more exotic.
And so on and so forth. Many dozens more possibilities. Can you tell more?
-
Probably the best example that I can come up with is UV-cured resins. The UV induces cross-linking, which can result in dramatic changes to the polymer's mechanical properties in a very short time. There are polymers that cross-link chemically as well. Vulcanization of rubber is a great example, and some of these can occur at room temperature under mild conditions.
-
Something based on the chemistry of superglue (cyanoacrylate) is possible. The cyanoacrylate adhesives react by anionic polymerization that is initiated by atmospheric water. As long as they are kept scrupulously dry they do not react, but the slightest trace of water initiates reaction, which is quite rapid - if you have ever got adrop between two fingers, you know what I mean.
-
I feel like this question gets asked a lot online.