Chemical Forums
Chemistry Forums for Students => Organic Chemistry Forum => Topic started by: kriggy on February 10, 2020, 03:27:00 AM
-
Guys, I need a bit help:
looking for a conditions that would oxidize my pyridine derivative into the N-oxide, ideally at room temperature.
(https://imgur.com/0PCbBgl)
So far I tried excess of mCPBA in refluxing CHCl3 which si the only method that somehow worked but it took a week to fully consume the starting heterocycle. I tried peroxide with acetic acid but that didnt work at all, I tried 35% peracetic acid in acetic acid but that doesnt seem to work as well.
Im gonna try TFA+H2O2 today but are there any other conditions that could work? I dont belive I can make it at room temperature but as long as I can make the product its fine
-
I know that you can make pertrifluoroacetic acid from trifluoroacetic acid and sodiumpercarbonate, this is a strong reagent. I dont have a reference, sorry. You should find in in Fieser&Fieser Reagents for Organic Synthesis I think.
Here is a reference:
https://www.organic-chemistry.org/chemicals/oxidations/trifluoroacetic-peracid.shtm
-
Hopper had a review in 2009 in Progress in Heterocyclic chemistry. The reagents discussed are MCPBA, peracetic acid, peroxy triflic acid, urea - peroxide complex, and triflic anhydride with sodium carbonate and hydrogen peroxide. The last one is supposed to be good for resistant pyridines.
-
Hopper had a review in 2009 in Progress in Heterocyclic chemistry. The reagents discussed are MCPBA, peracetic acid, peroxy triflic acid, urea - peroxide complex, and triflic anhydride with sodium carbonate and hydrogen peroxide. The last one is supposed to be good for resistant pyridines.
Do you really mean triflic anhydride? Trifluoromethanesulphonic anhydride?
A question is do you get bad conversion or byproduct formation? If the latter it does not help with stronger oxidizer maybe?
-
Thanks guys, I think I found the review (not sure if its the exact one, Im at home atm) but they mention UHP+TFAA and it seems to work. Might have to fiddle with the equivalents a bit but it works at room temperature
-
Rolnor - they write it as (Tf)2O in the review, so I think that is what they meant - didn't look up the original paper
-
While looking for something else, I did find a paper that oxidises pyridine to the N-oxide in quantitative yield using cyclohexanone dioxirane (compound h). I don't have any experience with the cyclohexanone version, but have worked with DMDO extensively in the past with a lot of success. The only obvious concern is in terms of safety - dioxiranes tend to be vigorously unstable. DMDO you make at such low concentrations that the risk is negligible, or you generate it in situ; I wonder if you couldn't adapt their procedure to use in situ generation of the cyclohexanone dioxirane as well.
https://doi.org/10.1021/ja00030a032
-
DMDO is a useful oxidant - have used it in the past.
-
While looking for something else, I did find a paper that oxidises pyridine to the N-oxide in quantitative yield using cyclohexanone dioxirane (compound h). I don't have any experience with the cyclohexanone version, but have worked with DMDO extensively in the past with a lot of success. The only obvious concern is in terms of safety - dioxiranes tend to be vigorously unstable. DMDO you make at such low concentrations that the risk is negligible, or you generate it in situ; I wonder if you couldn't adapt their procedure to use in situ generation of the cyclohexanone dioxirane as well.
https://doi.org/10.1021/ja00030a032
Thanks, I tried running the raction in acetone and using oxone to make it in situ but didnt work. However, I got full conversion using TFA+H2O2 or TFAA+UHP so Im fine now :)
THanks for help guys
-
Great!