Chemical Forums
Specialty Chemistry Forums => Chemical Engineering Forum => Topic started by: Henry_H on April 03, 2015, 06:41:01 PM
-
I have a quick technical question. My goal is to increase the gloss of the Rutile at 60 degrees.
My attempted solution is
1. To modify the process, I assume I could lower the temperature during the coating process or the drying process ( for sulphate process).
2. Or I could increase the Al2O3 coating percentage to enhance dispersion to create space particle.
Anyone who has more experienced got a better idea on this? Thanks.
-
I have a quick technical question. My goal is to increase the gloss of the Rutile at 60 degrees.
My attempted solution is
1. To modify the process, I assume I could lower the temperature during the coating process or the drying process ( for sulphate process).
2. Or I could increase the Al2O3 coating percentage to enhance dispersion to create space particle.
Anyone who has more experienced got a better idea on this? Thanks.
I have book about this ,but i did not do this study.if you need that book, yes ,you can e-mail me at mail address removed according to forum rules