Chemical Forums
General Forums => Generic Discussion => Topic started by: frankm on November 10, 2017, 06:57:57 AM
-
In this simple experiment we produce 98% nitrogen by the air using the paramagnetic property of oxygen that is attracted by the magnets
-
I would be interested to see more of how this experiment was performed. What type of magnets were used? how much nitrogen do you actually get? how was it captured? and how was 98% purity confirmed?
or is this something that you are planning on doing?
-
Photos of apparatus
-
In this simple experiment we produce 98% nitrogen by the air using the paramagnetic property of oxygen that is attracted by the magnets
How did you measure the output stream composition?
Judging from the image you have posted oxygen just miraculously disappears from the stream, that would mean violation of the mass conservation.
-
No, the oxygen remain in the tube enter the magnets!
-
so realistically you are talking about a very very small amount of nitrogen. Also it would only work for a short time before the oxygen would start to come out anyway.
So are you creating an electromagnet? still not entirely sure what I am looking at from the picture.
-
The BAC coil serves to slide the nitrogen to avoid clusters with oxygen inside the tube
-
so how did you determine the 98% nitrogen output?
-
Is simple:
100%air - 21% O2 = 98% N2 + 2% CO2,H2O,Argon
-
I doubt too. Putting figures on the induction, the resulting interaction energy with the oxygen's magnetism, and comparing with the ambient temperature tells "no". Unless I miss something, of course.
But a similar setup does work commonly. It uses a porous ceramic of a high-temperature superconductor. The Meissner effect lets the superconductor interact with the oxygen molecules at very short distance. Elegant.
-
With this system we can also produce HNO3 from air:
-
Is simple:
100%air - 21% O2 = 98% N2 + 2% CO2,H2O,Argon
So the 98% is theoretical? Any tests to verify? it seems to me that the diameter of the tube is high compared to what I estimate to be the magnetic field, of course I could be wrong. In theory there is no difference between theory and practice.
-
Is simple:
100%air - 21% O2 = 98% N2 + 2% CO2,H2O,Argon
You need a direct measurement, you can't just assume an experimental apparatus works perfectly.
-
The BAC coil serves to slide the nitrogen to avoid clusters with oxygen inside the tube
This is a word salad, it doesn't mean anything.
Sorry, but there is no way this contraption of yours is going to work the way you state it does.
I am locking the thread, this is in no way related to any real science.
-
Two systems for separate the majior elements of the air, with coils: