Chemical Etching of Stainless Steel

Started by hizzy | Last post by eugenedakin June 29, 2009, 11:27:45 PM

Dynamic Material Balance with composition dependent solution density

Started by nanopico | Last post by clustro June 29, 2009, 06:07:45 PM

doubt with meaning of equilibrium constant

Started by iamstupid | Last post by nanopico June 29, 2009, 05:56:48 AM

Help plz, on density at different temperature and pressure

Started by johnLeong | Last post by johnLeong June 29, 2009, 01:51:25 AM

need help on milling plate design

Started by johnLeong | Last post by johnLeong June 29, 2009, 01:43:45 AM

steam calculation

Started by SR1212 | Last post by clustro June 29, 2009, 12:20:53 AM

Effect of adding Acetic Acid on Conductivity

Started by jha_ashutosh | Last post by clustro June 29, 2009, 12:18:47 AM

need somne help with theoritical flame temperature for acetylene

Started by johnLeong | Last post by mbeychok June 26, 2009, 07:51:12 PM

self or auto refrigeration

Started by shahab mataji | Last post by mbeychok June 26, 2009, 07:25:03 PM

distillation column sizing and cost estimation

Started by qazinasir | Last post by qazinasir June 22, 2009, 08:57:20 AM

Benzene toluene distillation column design calculation

Started by rayyan | Last post by qazinasir June 22, 2009, 08:36:48 AM

pH control in a microbial fermentation vessel

Started by micro | Last post by eugenedakin June 22, 2009, 06:21:02 AM

polymer which softens at about 60C

Started by josey.mathew | Last post by eugenedakin June 21, 2009, 11:08:30 PM

question about chemical engineering courses..

Started by khalidkilo | Last post by eugenedakin June 20, 2009, 08:05:00 AM

Chemical Engineers help me please

Started by soso lulu | Last post by eugenedakin June 20, 2009, 07:54:31 AM