December 14, 2019, 06:33:17 AM
Forum Rules: Read This Before Posting


Topic: Emulsifying Vacuum oil - Hydrocarbon Solvent  (Read 235 times)

0 Members and 1 Guest are viewing this topic.

Offline flood

  • Very New Member
  • *
  • Posts: 1
  • Mole Snacks: +0/-0
Emulsifying Vacuum oil - Hydrocarbon Solvent
« on: September 21, 2019, 09:25:36 PM »
I have a problem.  I cleaned a vacuum pump out with Rainbow cable cleaner. The solvent label says "Hydrocarbon Solvent"
Ever since then, the vacuum pump is emulsifying water in the vacuum oil.. I can not separate the water out of the oil after use.

I have since refilled it 5 times and ran the pump for 20+ hours each time. Every time I drain it, the oil is still emulsified. I really need to get all the hydrocarbon solvent remains out, as the oil needs to be separated from water, filtered, and reused.

Is there anything I can do?


Sponsored Links