March 28, 2024, 04:22:24 PM
Forum Rules: Read This Before Posting


Topic: Calculate pH using Ionic Strength  (Read 4958 times)

0 Members and 1 Guest are viewing this topic.

Offline BHAVESH

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +0/-0
  • Gender: Male
Calculate pH using Ionic Strength
« on: March 25, 2020, 05:12:44 AM »
Hi,
Is there any way to calculate pH of water based on Ionic Strength?

Thanks
BS

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7979
  • Mole Snacks: +555/-93
  • Gender: Male
Re: Calculate pH using Ionic Strength
« Reply #1 on: March 25, 2020, 06:13:08 AM »
Yes, there is.
Check your textbook, Wikipedia (Self-ionization of water) and Chembuddy's pH calculation lectures
AWK

Offline BHAVESH

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +0/-0
  • Gender: Male
Re: Calculate pH using Ionic Strength
« Reply #2 on: March 26, 2020, 03:27:52 AM »
I mean natural water bodies having different ion concentration. So if analyze these ions, can we calculate pH using ionic strength of that particular water body?
And Can Van't Hoff Equation be applied here as well???
« Last Edit: March 26, 2020, 03:45:20 AM by BHAVESH »
BS

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7979
  • Mole Snacks: +555/-93
  • Gender: Male
Re: Calculate pH using Ionic Strength
« Reply #3 on: March 26, 2020, 04:28:44 AM »
It is enough to calculate the ionic strength, H3O+ ion activity coefficient and apply a precise definition of pH. Condition - water must not contain hydrolyzing ions.
AWK

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27633
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Calculate pH using Ionic Strength
« Reply #4 on: March 26, 2020, 08:08:29 AM »
Assuming pH is a function of two things only - water autoionization and activity coefficients that depend on the ionic strength - yes, it is enough to knwo concentration of all ions present.

Trick is, with natural waters these assumptions will be never correct, as they contain plenty of acids/bases that change the pH. Almost every ion present, be it cation or anion, reacts with water slightly changing pH. In the case of ions like Na+ or Cl- effects can be safely ignored, in the case of ions like Ca2+ or CO32- - present in every natural water - the effect is quite prominent.

It is actually much easier to just measure pH than to do full analysis of all ions present. Please remember what we measure is not the concentration, but activity of ions, so the pH measured is already corrected for the ionic strength.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline BHAVESH

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +0/-0
  • Gender: Male
Re: Calculate pH using Ionic Strength
« Reply #5 on: March 27, 2020, 05:27:08 AM »
I fully agree on what you say. Now for an example, in Reverse Osmosis systems; feed pH is measured and then pH in reject & permeate is calculated based on alkalinity and pH of feed water using following equation.

CO2f = Alkf X exp-((pHf-6.3022)/0.423)

then, pH of Concentrate(Reject) is calculated using alkalinity/CO2 ration of concentrate water with following equation.

pHc = 0.423 X Ln(Alk/CO2ratio) X 6.2033

The reference of above equations are given in ASTM - D4582 for the calculation.

Now my question is, in Reverse Osmosis; since membrane is semipermeable CO2passes through membrane and thus we get lower pH of permeate water. When we calculate pH of concentrate water, it is on higher side than the actual pH measured. How??

Secondly, I want to co-relate carbonate iion conversion from bicarbonate ion at specific pH of concentrate at constant given temperature.

« Last Edit: March 27, 2020, 07:10:39 AM by BHAVESH »
BS

Offline BHAVESH

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +0/-0
  • Gender: Male
Re: Calculate pH using Ionic Strength
« Reply #6 on: March 27, 2020, 07:36:25 AM »
And I have already calculated Activity Coefficient using Davies equation which is

    Log[γz] = -A X Z2[√I/(1+ √I)]-0.3I
Where, A = 1.82 X 106 X [ET] - 1.5
            I = Ionic Strength
           E = [60954/(T+116)] - 68.937
           T = Temp in °K

Now I am unable to catch, where am I missing?
BS

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27633
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Calculate pH using Ionic Strength
« Reply #7 on: March 27, 2020, 02:49:22 PM »
Looks like you are trying to calculate pH ignoring all acid/base equilibria present. No way. You have to start with these equilibria, ionic strength is the last factor to be taken into account.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline BHAVESH

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +0/-0
  • Gender: Male
Re: Calculate pH using Ionic Strength
« Reply #8 on: March 28, 2020, 04:31:59 AM »
No Borek, I have already calculated Temperature Coefficients for a Variety of Acid-Base and Solubility Constants. Not only this, I have calculated pK, K, K' & pK' of various Acid-Base and calculation of saturation pH.

I used following equation for Acid-Base to calculate pK.
Formula used for pK's:  pK = a1 + a2/T + a3Log[T] + a4T + a5/T2
a1, a1, a3 a4, & a5 figures have been referred from various books like

Nordstrom etal, 1990
Data in Sillen & Martell, 1964,1971
Harned & Owen, 1958
Plummer & Busenberg, 1982

etc...
BS

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27633
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Calculate pH using Ionic Strength
« Reply #9 on: March 28, 2020, 05:03:41 AM »
All the time you talk about calculating constants, not about finding the equilibrium they describe.

Let's start with something simple, to make sure we are talking about the same thing. If I tell you I did analysis of a solution and I know it contains 0.03 M Na+, 0.01 M HCO3- and 0.01 M CO32-, will you be able to tell me what is pH of this solution?
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline BHAVESH

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +0/-0
  • Gender: Male
Re: Calculate pH using Ionic Strength
« Reply #10 on: March 29, 2020, 05:25:49 AM »
What I understood from your question that it is a solution of 0.01 M Na2CO3 & 0.01 M of NaHCO3. But its not clear how shall I calculate pH.
BS

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27633
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Calculate pH using Ionic Strength
« Reply #11 on: March 29, 2020, 02:03:07 PM »
What I understood from your question that it is a solution of 0.01 M Na2CO3 & 0.01 M of NaHCO3. But its not clear how shall I calculate pH.

You see, it is a basic, HS level problem, one that can be solved with a reasonable accuracy just by looking at it and checking pKa values for carbonic acid. It doesn't require any fancy formulas for pK values, nor ionic strength of the solution.

I strongly suggest you read any general chemistry textbook, section on the equlibria calcuation, especially acid base equilibria and pH calculation. Plenty of free texts on the web. At the moment you are trying to run without knowing how to walk.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline BHAVESH

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +0/-0
  • Gender: Male
Re: Calculate pH using Ionic Strength
« Reply #12 on: April 01, 2020, 08:54:29 AM »
Thanks Borek for your advise.
pH will be 12.0
I used Ka · Kb = 1 X 10-14
Please correct me if I am wrong.
BS

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7979
  • Mole Snacks: +555/-93
  • Gender: Male
Re: Calculate pH using Ionic Strength
« Reply #13 on: April 01, 2020, 09:47:58 AM »
You are wrong. pH should be close to 10.
AWK

Offline BHAVESH

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +0/-0
  • Gender: Male
Re: Calculate pH using Ionic Strength
« Reply #14 on: April 02, 2020, 11:33:38 AM »
pH is going to be 10.32

Using Henderson-Hassel Equation using Ka2 = 4.8 X 10-11
BS

Sponsored Links