August 13, 2020, 02:00:11 AM
Forum Rules: Read This Before Posting


Topic: Platinum tungsten paired electrode if platinum ring electrode?  (Read 184 times)

0 Members and 1 Guest are viewing this topic.

Offline Gavtadze vazha

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Hello,
We are determining manganese concentration by potentiometric titration using a platinum wire spiral/ tungsten wire couple as electrodes in combination with sodium pyrophosphate, as described in the standard method. We are obtaining good results with this method.
Recently, we received an automatic potentiometer Titrino Plus 848, which has a combined platinum ring electrode, supposedly equipped with Ag / AgCl reference electrode element. Work on a new device shows that we are getting higher concentrations of manganese compared to the paired platinum/tungsten electrode method, in addition, we are observing irreproducible results with this machine.
I would be grateful to hear your opinion about the acceptability of using this Pt ring ORP electrode in the potentiometric titration of manganese for arbitration purposes, while the standard procedures indicate only the use of platinum-calomel, platinum-platinum or platinum-tungsten couples.
« Last Edit: April 12, 2020, 03:54:38 PM by Gavtadze vazha »

Offline chenbeier

  • Sr. Member
  • *****
  • Posts: 1066
  • Mole Snacks: +79/-20
  • Gender: Male
Re: If you can tell me and help me
« Reply #1 on: April 12, 2020, 02:41:41 PM »
I would ask this question to Methrom. Probably they have similar electrodes for your special case.

Sponsored Links