March 28, 2024, 04:23:53 PM
Forum Rules: Read This Before Posting


Topic: Physical and theoretical chemistry questions  (Read 2772 times)

0 Members and 1 Guest are viewing this topic.

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Physical and theoretical chemistry questions
« on: November 05, 2020, 10:19:37 AM »
Hello,
  Here are the questions with unknown answers.
1) At 1 bar, the boiling point of water is  372.78 K. At this temperature and pressure, the density of liquid water is 958.66 kg/m3 and that of gaseous water is 0.59021 kg/m3. What are the molar volumes. in m3 mol-1 of liquid and gaseous water at this temperature and pressure? in Liters/mol?

2) Refer to the answer to 1) question. Assuming that a water molecule excludes the other water molecules from a cubic region centered on itself, estimate the average distance between nearest-neighbor water molecules in the liquid and in the gas. 

3)Calculate the molar volume and gaseous water at 1 bar and 372.78 K from ideal gas equation. What is the error, expressed as a percentage of the value, you calculated in question 1).

4) At 372.78 K, the virial coefficient B* for water is -1.487 × 10-7 Pa-1. Calculate the molar volume of gaseous water at 1 bar and 372.78 K from the virial equation: Z=PV̅/RT= 1+B*P. What is the error, expressed as a percentage of the value, you computed in question 1).

5) Compute the molar volume of gaseous water at 1 bar and 372.78 K from van der Waals' equation. The van der Waals' parameters for water are a=5.537 bar L2 mol-1 and b=0.0305 L mol-1. What is the error, expressed as the percentage of the value, you computed in question 1)?

6)What are your comments on the results in questions 3,4 and 5? At this temperature, would you expect the accuracy to increase or decrease at lower pressure?




   
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline Corribus

  • Chemist
  • Sr. Member
  • *
  • Posts: 3471
  • Mole Snacks: +526/-23
  • Gender: Male
  • A lover of spectroscopy and chocolate.
Re: Physical and theoretical chemistry questions
« Reply #1 on: November 05, 2020, 10:43:06 AM »
Please read the forum rules. You must show work to receive help.
What men are poets who can speak of Jupiter if he were like a man, but if he is an immense spinning sphere of methane and ammonia must be silent?  - Richard P. Feynman

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Physical and theoretical chemistry questions
« Reply #2 on: November 06, 2020, 01:13:44 AM »
Answer to 1)Molar volume of liquid water is  0.000017275 m³/mol at 1 bar and 372.78 K.
Molar volume of gaseous water is 0.000013229 m3/mol.

Answer to 3) Ideal gas equation is PV=nRT. So, V=(8.314472J/(mol.K) ⨉ 372.78 K)/1 bar=30.9947 litres/mol. By the way, are these answers correct?

  I am working on other questions. If i found answers to other questions, I shall post them here.
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27633
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Physical and theoretical chemistry questions
« Reply #3 on: November 06, 2020, 03:03:13 AM »
Answer to 1)Molar volume of liquid water is  0.000017275 m³/mol at 1 bar and 372.78 K.
Molar volume of gaseous water is 0.000013229 m3/mol.

That would mean molar volume of the gas is substantially lower than the molar volume of the liquid, doesn't make much sense.

Quote
Answer to 3) Ideal gas equation is PV=nRT. So, V=(8.314472J/(mol.K) ⨉ 372.78 K)/1 bar=30.9947 litres/mol.

That looks reasonably close to what I got. Note how this result is orders of magnitude different from the one you calculated in 1.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Physical and theoretical chemistry questions
« Reply #4 on: November 06, 2020, 04:30:29 AM »
Answer to 3) The computed value of the molar volume of gaseous water is 0.000013229 m3/mol in question 1) and the computed value of the molar volume of gaseous  water is 0.0309947 m3/mol in question 3) So the error is 234294% of 0.000013229 m3/mol.

Answer to 4) Z= 0.98513. and V̅=30.5338 litres /mol. So, the error is 230809% of 0.000013229 m3/mol.
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27633
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Physical and theoretical chemistry questions
« Reply #5 on: November 06, 2020, 07:39:18 AM »
The computed value of the molar volume of gaseous water is 0.000013229 m3/mol in question

It is not, you are making some error in the way you are approaching the problem. Show how you got your result.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Physical and theoretical chemistry questions
« Reply #6 on: November 06, 2020, 08:41:08 AM »
 My revised answer to question 1) is  0.0309946887216 m3/mol.

 My revised answer to question 3). We don't find any error in the computed value in question 3)

My revised answer to question 4). The error, expressed as a percentage of the value. computed in question 1) is 1.487%.

Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27633
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Physical and theoretical chemistry questions
« Reply #7 on: November 06, 2020, 02:56:03 PM »
My revised answer to question 1) is  0.0309946887216 m3/mol.

It is still wrong. Please show how you are getting your values from the data given.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Physical and theoretical chemistry questions
« Reply #8 on: November 07, 2020, 12:16:07 AM »
1m3=1000 l. Molar volume of gaseous water is V=(1 mol* 8.314472J/(mol*K)*372.78 K)/1 bar=3099.4688722 J/bar [Recall 1J/bar=0.01 litre] So, V=30.994688722 Litres

Now, density of a gaseous water is 0.00059021 kg/0.001m3. For 1 liter of gaseous water, density is 0.001m3. So, for 30.994688722 litres, density is 0.030994688722m3/mol
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27633
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Physical and theoretical chemistry questions
« Reply #9 on: November 07, 2020, 04:33:25 AM »
1m3=1000 l. Molar volume of gaseous water is V=(1 mol* 8.314472J/(mol*K)*372.78 K)/1 bar=3099.4688722 J/bar [Recall 1J/bar=0.01 litre] So, V=30.994688722 Litres

That's OK, but this is answer to 3, not to 1.

Quote
Now, density of a gaseous water is 0.00059021 kg/0.001m3

A bit strange use of units/numbers, but OK.

Quote
For 1 liter of gaseous water, density is 0.001m3

No, that's a volume, not density.

Quote
So, for 30.994688722 litres, density is 0.030994688722m3/mol

Sorry, it doesn't make any sense. Density is not measured in m3/mol, that's a molar volume unit. Plus, density doesn't depend on the volume which you seem to be suggesting, density is an intensive property.

In 1. you are asked to calculate the molar volume from the experimental data, using given density of 0.59021 kg/m3. How is the molar volume defined?
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Physical and theoretical chemistry questions
« Reply #10 on: November 07, 2020, 06:42:51 AM »
Molar volume[tex]=\frac{ Automic weight \times molar mass}{density(\rho)}[/tex]

I don't know the automic weight of H2O(liquid and vapour). But i know the automic mass of hydrogen[itex](1.6736e-24 \text{g})[/itex] and oxygen[itex](2.65673e-23\text{g})[/itex]

 So, how to compute the automic weight of H2O(liquid and vapour)?
And also how to compute molar volumes of liquid water and gaseous water at 1 bar pressure and 372.78 K temperature?


 
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27633
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Physical and theoretical chemistry questions
« Reply #11 on: November 07, 2020, 06:51:28 AM »
No idea what is automic weight, where did you got this definition from?

https://en.wikipedia.org/wiki/Molar_volume
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Physical and theoretical chemistry questions
« Reply #12 on: November 07, 2020, 07:13:51 AM »
Automic weights of H2O (liquid and vapour) is not given in your link.
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27633
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Physical and theoretical chemistry questions
« Reply #13 on: November 07, 2020, 08:08:32 AM »
It was not intended to contain information on made up or misread/misnamed quantity, it was intended to help you calculate the molar volume of the water from the given, experimental data.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Physical and theoretical chemistry questions
« Reply #14 on: November 07, 2020, 08:48:01 AM »
Molar volume of liquid water is 0.00001879 m3/mol.

Molar volume of gaseous water is 0.030589 m3/mol using Charles' law for temperature- volume relationship.
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Sponsored Links