March 28, 2024, 03:41:31 PM
Forum Rules: Read This Before Posting


Topic: Precipitation and dissolution question  (Read 2254 times)

0 Members and 1 Guest are viewing this topic.

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Precipitation and dissolution question
« on: January 12, 2021, 11:00:14 AM »
[1]  Assuming that no equilibria other than dissolution are involved, calculate the concentration of all solute species in each of the following solutions of salts in contact with a solution containing a common ion. Show that it is not appropriate to neglect the changes in the initial concentrations of the common ions.

a. TlCl3(s) in 0.025 M TlNO3.

b. BaF2(s) in 0.0313 M KF.

c. MgC2O4 in 2.250 L of a solution containing 8.156 g of Mg(NO3)2

d.Ca(OH)2(s) in an unbuffered solution initially with a pH of 12.700

[2] Explain why the changes in concentrations of the common ions in question [1] can be neglected.
[3] Explain why the changes in concentrations of the common ions in Question [2] cannot be neglected


 What are the answers to all these three question?
 I am working on them.  Any member may guide in this regard if  he/she knows the answers.
« Last Edit: January 12, 2021, 12:03:34 PM by Win,odd Dhamnekar »
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline billnotgatez

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 4399
  • Mole Snacks: +223/-62
  • Gender: Male
Re: Precipitation and dissolution question
« Reply #1 on: January 12, 2021, 12:06:56 PM »
You have to show your attempts or thoughts at solving the question to receive help.
This is a forum policy.
Click on the link near the top center of the forum page.
Forum Rules: Read This Before Posting.
http://www.chemicalforums.com/index.php?topic=65859.0

Offline mjc123

  • Chemist
  • Sr. Member
  • *
  • Posts: 2048
  • Mole Snacks: +296/-12
Re: Precipitation and dissolution question
« Reply #2 on: January 13, 2021, 05:31:06 AM »
Quote
[1]  ... Show that it is not appropriate to neglect the changes in the initial concentrations of the common ions.
[2] Explain why the changes in concentrations of the common ions in question [1] can be neglected.
[3] Explain why the changes in concentrations of the common ions in Question [2] cannot be neglected

These three questions are inconsistent with each other. Can you post the exact wording of the original questions?
Also, it looks like you need solubility product values to answer the questions. Are you given those values?

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Precipitation and dissolution question
« Reply #3 on: January 13, 2021, 09:38:06 AM »
Answer to [1] a.


TlCl(s) in Tl(NO3)
Ksp=1.7×10-4=[Tl+][Cl-]; Letx=[Cl-]:
1.7×10-4=(x+0.025)x
Solving quadratic equation x2+ 0.025x -1.7×10-4=0; we get x=0.006 M
[Tl+]=0.025 + 0.006=3.1× 10-2 M; [Cl-]=6.0×10-3 M

Answer to [1] b.

BaF2(s) in 0.0313 M KF
Ksp=2.4× 10-5=[Ba2+][F-]2, Let x=[Ba2+]
2.4×10-5=x(x+0.0313)2
Solving cubic equation x3+0.0626x2 + 0.000969x -2.4× 10-5=0; we get x=0.01251 M; [Ba2+]=0.01251 M; [F-]=0.01251 +0.0313 =0.04381 M

Answer to [1] c.

MgC2O4 in 2.250 L of solution containing 8.156 g of Mg(NO3)2

Molar mass of Mg(NO3)2=148.3148 g/mol So,[itex]\frac{8.156 g}{148.3148 g/mol}=0.05499 [/itex] mol are number of moles of Mg(NO3)2

Molarity of Mg(NO3]2=[itex]\frac{0.05499 mol}{2.250 L}=0.02444 M[/itex]
Let x=[C2O42-]
Ksp=7× 10-7= [Mg2+][C2O42-]=x(x+0.02444 )
Solving the quadratic equation x2 +0.02444x -7× 10-7=0; we get x=0.000028608 M

Thus, [C2O42-]=2.8608× 10-5 M; [Mg2+]=0.000028608 + 0.02444 = 0.0245 M

Answer to [1] d.

Ca(OH)2 (s) in an unbuffered solution initially with a pH of 12.700

pH=12.700; pOH=1.300, [OH-]=0.0501 M; Let x= [Ca2+]
Ksp= 1.3× 10-6=[Ca2+][OH-]2=x(x+0.050)2

Solving cubic equation x3 +0.1x2 +0.0025x - 1.3× 10-6=0; we get x=0.0005095 M
[Ca2+]=5.09560×10-4 M, [OH-]=0.00050956 +0.050=0.05050 M

 Now how to answer [2] and [3] ?



 
« Last Edit: January 13, 2021, 11:55:07 AM by Win,odd Dhamnekar »
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7979
  • Mole Snacks: +555/-93
  • Gender: Male
Re: Precipitation and dissolution question
« Reply #4 on: January 13, 2021, 10:34:48 AM »
Check the dissolution products of your compounds. Only the Ksp TlCl value matches my table data. Of course, sometimes the authors of various computational tasks modify the numbers to facilitate the calculation.
However, the value of Ksp Ca(OH)2 is clearly wrong, and also your calculation in this case.
Besides, there is a calculation error related to BaF2.
AWK

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Precipitation and dissolution question
« Reply #5 on: January 13, 2021, 11:05:19 AM »
Check the dissolution products of your compounds. Only the Ksp TlCl value matches my table data. Of course, sometimes the authors of various computational tasks modify the numbers to facilitate the calculation.
However, the value of Ksp Ca(OH)2 is clearly wrong, and also your calculation in this case.
Besides, there is a calculation error related to BaF2.

Hello,
        Please check the Ksp value for Ca(OH)2 in below table.
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7979
  • Mole Snacks: +555/-93
  • Gender: Male
Re: Precipitation and dissolution question
« Reply #6 on: January 13, 2021, 11:25:14 AM »
In the case of Ca(OH)2, the calculation method is different, because OH- comes only from the dissociation of calcium hydroxide, and then the concentration of Ca2+ must be about half the concentration of hydroxide ions. The pH of the calcium hydroxide complies with Ksp 5.5·10-6. In the case of BaF2, you assumed stoichiometry for BaF1 in your calculations.

As mjc123 has already noted, questions 2 and 3 in the form as you presented them contradict each other. So it is difficult to answer them.
AWK

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Precipitation and dissolution question
« Reply #7 on: January 13, 2021, 12:05:29 PM »
In the case of Ca(OH)2, the calculation method is different, because OH- comes only from the dissociation of calcium hydroxide, and then the concentration of Ca2+ must be about half the concentration of hydroxide ions. The pH of the calcium hydroxide complies with Ksp 5.5·10-6. In the case of BaF2, you assumed stoichiometry for BaF1 in your calculations.

As mjc123 has already noted, questions 2 and 3 in the form as you presented them contradict each other. So it is difficult to answer them.

Hello,
        In the case of [1] b. , I have rectified my computational errors.  But in the case of [1] d. [OH-] ions also come from an unbuffered solution having pH 12.700.
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7979
  • Mole Snacks: +555/-93
  • Gender: Male
Re: Precipitation and dissolution question
« Reply #8 on: January 13, 2021, 12:26:17 PM »
"Unbuffered solution" means that OH- ions only come from the dissociation of Ca(OH)2 (those from the dissociation of water are negligible). Then Ksp = 4x3, where x is the concentration of calcium ions and [OH-] = 2x.
In fact, there is one more equilibrium Ca(OH)2  ::equil:: CaOH+ + OH- in the calcium hydroxide solution, which is not taken into account by the solubility product. As a result, the concentration of calcium ions calculated from the actual pH value of the solution is slightly lower (a few%) than half of the concentration of hydroxide ions. With your Ksp value, nonsense comes out of your incorrect calculation.
AWK

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Precipitation and dissolution question
« Reply #9 on: January 13, 2021, 02:54:02 PM »
"Unbuffered solution" means that OH- ions only come from the dissociation of Ca(OH)2 (those from the dissociation of water are negligible). Then Ksp = 4x3, where x is the concentration of calcium ions and [OH-] = 2x.
In fact, there is one more equilibrium Ca(OH)2  ::equil:: CaOH+ + OH- in the calcium hydroxide solution, which is not taken into account by the solubility product. As a result, the concentration of calcium ions calculated from the actual pH value of the solution is slightly lower (a few%) than half of the concentration of hydroxide ions. With your Ksp value, nonsense comes out of your incorrect calculation.

Hello,
         I may be wrong for computing the answer for [1] d. But what is your opinion about the below-given answer which i found on other chemistry educational website. Is this answer also nonsense?

Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7979
  • Mole Snacks: +555/-93
  • Gender: Male
Re: Precipitation and dissolution question
« Reply #10 on: January 13, 2021, 03:40:29 PM »
This is a miscalculation for two reasons: the value of the solubility product is overstated; the calculation is for the presence of a common ion and the substitution of the numbers into the formula contains a fatal error. If OH- ions are derived only from calcium hydroxide the expression should be Ksp = 4x3,
if we have additional OH- ions with concentration A, the expression Ksp = x(2x+A)2.
AWK

Offline mjc123

  • Chemist
  • Sr. Member
  • *
  • Posts: 2048
  • Mole Snacks: +296/-12
Re: Precipitation and dissolution question
« Reply #11 on: January 13, 2021, 05:07:55 PM »
Quote
Answer to [1] a.

TlCl(s) in Tl(NO3)
Your original post said TlCl3. Was that a mistake?

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Precipitation and dissolution question
« Reply #12 on: January 13, 2021, 10:55:54 PM »
Quote
Answer to [1] a.

TlCl(s) in Tl(NO3)
Your original post said TlCl3. Was that a mistake?

Yes, That was a mistake.
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Offline Win,odd Dhamnekar

  • Full Member
  • ****
  • Posts: 165
  • Mole Snacks: +0/-5
  • Gender: Male
  • Stock Exchange Trader, Investor,Chemistry Hobbyist
Re: Precipitation and dissolution question
« Reply #13 on: January 13, 2021, 11:18:04 PM »
This is a miscalculation for two reasons: the value of the solubility product is overstated; the calculation is for the presence of a common ion and the substitution of the numbers into the formula contains a fatal error. If OH- ions are derived only from calcium hydroxide the expression should be Ksp = 4x3,
if we have additional OH- ions with concentration A, the expression Ksp = x(2x+A)2.

Hello,
    Thanks for your guidance and explaining the definition of "Unbuffered solution" in your reply #8.
Any science consists of the following process.
 1) See 2) Hear 3) Smell if needed 4) Taste if needed
5) Think 6) Understand 7) Inference 8) take decision [Believe or disbelieve, useful or useless, healthy or unhealthy, cause or effect, favorable or unfavorable, practical or theoretical, practically possible or practically impossible, true or false or  any other required criteria]

Sponsored Links