March 28, 2024, 07:41:55 PM
Forum Rules: Read This Before Posting


Topic: Oakton pH6+ calibration Issue  (Read 1797 times)

0 Members and 1 Guest are viewing this topic.

Offline SulfideSmellsLikeMoney

  • Very New Member
  • *
  • Posts: 1
  • Mole Snacks: +0/-0
Oakton pH6+ calibration Issue
« on: February 15, 2022, 02:00:02 PM »
My Oakton pH 6+ meter isn't stabilizing during calibration. It's currently set on USA 3pt. I've left the probe in my pH 7 solution and hit calibrate, but it won't stabilize. I can go ahead and hit enter to get it to say 7.00 but as soon as I try to calibrate again, it reads ~7.48 - ~7.51 when in calibration mode and still won't stabilize. I thought I had it working earlier, but then when I went to use pH 10 solution, it wouldn't stabilize and threw Er 5. same with pH of 4. Does anyone have any experience with this normally VERY simple to use meter?

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27633
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Oakton pH6+ calibration Issue
« Reply #1 on: February 15, 2022, 02:46:00 PM »
Such things often mean electrode is dying.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Sponsored Links