March 29, 2024, 05:19:29 AM
Forum Rules: Read This Before Posting


Topic: Attempting to make 4M KCL  (Read 4602 times)

0 Members and 1 Guest are viewing this topic.

Offline Gregory Berardi

  • Very New Member
  • *
  • Posts: 1
  • Mole Snacks: +0/-0
Attempting to make 4M KCL
« on: May 30, 2022, 03:52:10 PM »
I am not a chemist! I am trying to make 4M KCL for storing my pH probe. I took ~ 800 ml of RO water (not double distilled) and added 4M of KCL. The solution is supposed to have a pH of ~ 4, but it is ~ 8 pH.

I used 298.2 g of KCL and added the water until it was 1000ml. I heated the solution to 90°C on a hot stir plate and let it go for about an hour. I was adding water to keep it at the 1000ml level.

What am I doing wrong?

Offline jeffmoonchop

  • Full Member
  • ****
  • Posts: 334
  • Mole Snacks: +37/-5
  • Gender: Male
Re: Attempting to make 4M KCL
« Reply #1 on: May 30, 2022, 04:42:01 PM »
Why do you need to know the pH of the solution? Is your pH meter calibrated? Did you use the right compound, how pure? What water did you use? Tap water may be at a higher pH due to additives.

What was the purpose of heating it? Just to dissolve the solid? At what temperature did you take the pH?

Offline jeffmoonchop

  • Full Member
  • ****
  • Posts: 334
  • Mole Snacks: +37/-5
  • Gender: Male
Re: Attempting to make 4M KCL
« Reply #2 on: May 30, 2022, 04:43:12 PM »
Sorry just noticed you said you used RO water.

Technically the pH should be 7, but addition of salt can cause a lower reading.

Online Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27634
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Attempting to make 4M KCL
« Reply #3 on: May 30, 2022, 07:39:47 PM »
The solution is supposed to have a pH of ~ 4

No, that's not expected pH for KCl solution.

If prepared with distilled water and kept in an inert atmosphere, it should have pH close to neutral (not exactly neutral, K+ reacts with water acidifying the solution a bit, plus there are thermodynamic effects). If allowed to equilibrate with air (containing CO2) pH should go even further down down and stay somewhere between 5-6 (due to the creation of the carbonic acid), but it won't go lower.

No idea why the pH is higher - but there is always a chance water or salt are contaminated.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Babcock_Hall

  • Chemist
  • Sr. Member
  • *
  • Posts: 5592
  • Mole Snacks: +319/-22
Re: Attempting to make 4M KCL
« Reply #4 on: May 31, 2022, 08:14:39 AM »
@OP, "M" is only for molar, not for moles, which uses a lowercase letter.

Sponsored Links