March 28, 2024, 08:08:53 AM
Forum Rules: Read This Before Posting


Topic: Stuck on this problem  (Read 1994 times)

0 Members and 1 Guest are viewing this topic.

Offline tkle28

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Stuck on this problem
« on: May 11, 2023, 03:22:43 AM »
Hello, I ran across this problem and was wondering if my answer is correct.
The question is: What is the pH of a 0.065 M solution of HF? Ka(HF) = 6.8 x 10^-4. For this one I got 2.26 and apparently the answer was 2.18. Can someone tell me what I did wrong?

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27637
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Stuck on this problem
« Reply #1 on: May 11, 2023, 06:35:06 AM »
Tell us how you got 2.26.

(Actually 2.18 doesn't look exactly correct either).
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline tkle28

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Re: Stuck on this problem
« Reply #2 on: May 11, 2023, 06:50:51 AM »
Tell us how you got 2.26.

(Actually 2.18 doesn't look exactly correct either).

To be quite Frank with you, my calculations itself were all over the place. I somehow ended with 2.77 but since 2.26 was the closest answer I picked that. I found H+ by doing root symbol(0.00068) x (0.065) then got my answer of 0.00169, then I just put in -log(0.00169) in got an answer of 2.77. I’m trying to figure out what exactly I’m doing wrong.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27637
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Stuck on this problem
« Reply #3 on: May 11, 2023, 07:02:10 AM »
Putting numbers into random formulas is never going to be a valid strategy :/

[itex][H^+] = \sqrt{K_a\times C_a}[/itex] is a formula that is valid only under a specific assumption about the acid dissociation. Do you recall what this assumption is?
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline tkle28

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Re: Stuck on this problem
« Reply #4 on: May 11, 2023, 07:05:03 AM »
Putting numbers into random formulas is never going to be a valid strategy :/

[itex][H^+] = \sqrt{K_a\times C_a}[/itex] is a formula that is valid only under a specific assumption about the acid dissociation. Do you recall what this assumption is?

Is it whenever it’s weak?

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27637
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Stuck on this problem
« Reply #5 on: May 11, 2023, 08:32:00 AM »
Is it whenever it’s weak?

No. Just because it is weak is not enough.

In general this formula works reasonably well when the acid is dissociated less than 5%. Is this the case?
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Aldebaran

  • Full Member
  • ****
  • Posts: 110
  • Mole Snacks: +4/-1
Re: Stuck on this problem
« Reply #6 on: May 11, 2023, 06:45:22 PM »
Well solving the quadratic is pretty tedious but I persevered and get 2.199. However it’s rather late at night here and I may well have made a slip or rounding error. I might check it in the morning when I’m more awake.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27637
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Stuck on this problem
« Reply #7 on: May 12, 2023, 02:56:55 AM »
2.20 is what I got as well.

(lol, you haven't seen really tedious calculations yet :D )
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Aldebaran

  • Full Member
  • ****
  • Posts: 110
  • Mole Snacks: +4/-1
Re: Stuck on this problem
« Reply #8 on: May 12, 2023, 07:02:04 AM »
To help the OP. Looking at your calculations there’s an error other than the approximation. Root of 0.00068 x 0.065 is 6.6483 x 10^-3 and the log of this is - 2.177 giving pH 2.18 as per the given answer. So it seems the question assumes the approximation method was expected.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27637
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Stuck on this problem
« Reply #9 on: May 12, 2023, 01:14:23 PM »
So it seems the question assumes the approximation method was expected.

At nearly 10% dissociation that's a bad idea (I don't blame you for checking, I blame whoever asked the question and expected the answer).
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Vidya

  • Full Member
  • ****
  • Posts: 839
  • Mole Snacks: +46/-62
  • Gender: Female
  • Online Chemistry and Organic Chemistry tutor
    • Online Chemistry Tutor
Re: Stuck on this problem
« Reply #10 on: May 12, 2023, 11:30:56 PM »
In many exams and books also, approximation is assumed for these type of questions.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27637
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Stuck on this problem
« Reply #11 on: May 13, 2023, 05:35:13 AM »
In many exams and books also, approximation is assumed for these type of questions.

Problem is not with using the approximation, it is with _misusing_ it outside of its applicability.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Sponsored Links