April 26, 2024, 01:38:47 AM
Forum Rules: Read This Before Posting


Topic: How to determine vapor pressures in solutions  (Read 4159 times)

0 Members and 1 Guest are viewing this topic.

Offline zerality

  • Regular Member
  • ***
  • Posts: 23
  • Mole Snacks: +0/-0
  • Gender: Male
How to determine vapor pressures in solutions
« on: January 20, 2007, 05:29:38 PM »
Hi,

I need some assistance solving this problem:
A solution of unknow composition of Benzene and Toluene is prepared, and the mole fractions of benzene and toluene in the vapor phase at 25 degrees celsius are each .50
The vapor pressures of benzene and toulene respectively are 95 and 28 torr at 25 degrees celsius.
Calculate the mole fractions of benzene and toluene in the solution.

I know
 Ptotal = 95 Xliquidbenzene   + 28 (1 - Xliquidbenzene)


I know that the mole fractions of Benzene and Toluene in the vapor phase is important but don't know where to proceed from my above equation.

Thanks
« Last Edit: January 20, 2007, 05:37:34 PM by zerality »

Offline Yggdrasil

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 3215
  • Mole Snacks: +485/-21
  • Gender: Male
  • Physical Biochemist
Re: How to determine vapor pressures in solutions
« Reply #1 on: January 20, 2007, 07:49:09 PM »
Recall that the total pressure is the sum of the partial pressures of the components of your vapor.  Do you know how to find the partial pressure of toluene and benzene given the mole fraction in the vapor?

Offline zerality

  • Regular Member
  • ***
  • Posts: 23
  • Mole Snacks: +0/-0
  • Gender: Male
Re: How to determine vapor pressures in solutions
« Reply #2 on: January 20, 2007, 11:53:42 PM »
Ok,

I think I have the answer, but am not 100% sure:

Ptotal = 95 Xliquidbenzene   + 28 (1 - Xliquidbenzene)
         = 67 X l benzene

Ptotal = (Pbenzene) / .5
                         = [(95 Xliquidbenzene)]/.5

Using simultaneous equations: Xliquidbenzene = .2276 and Xliquidtoluene = .7724

Offline Yggdrasil

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 3215
  • Mole Snacks: +485/-21
  • Gender: Male
  • Physical Biochemist
Re: How to determine vapor pressures in solutions
« Reply #3 on: January 21, 2007, 03:49:39 AM »
Here's my solution:

Pbenzene = Xgasbenzene * Ptotal = (95torr)Xliquidbenzene
Ptoluene = Xgastoluene * Ptotal = (28torr)Xliquidtoluene

Since Xgastoluene = Xgasbenzene = 0.5 and Xliquidtoluene = 1 - Xliquidbenzene these two equations simplify to:

0.5Pt = 95Xlb
0.5Pt = 28(1 - Xlb)

Therefore, setting the two equations equal to eachother:

95Xlb = 28(1 - Xlb)
67Xlb = 28
Xlb = 0.418
Xlt = 0.582

Offline zerality

  • Regular Member
  • ***
  • Posts: 23
  • Mole Snacks: +0/-0
  • Gender: Male
Re: How to determine vapor pressures in solutions
« Reply #4 on: January 21, 2007, 10:23:57 AM »
Thanks for your help. I see and understand where I went wrong.

Sponsored Links