October 19, 2020, 06:48:52 PM
Forum Rules: Read This Before Posting


Topic: Few electrochemical problrms  (Read 3110 times)

0 Members and 1 Guest are viewing this topic.

chemistrie

  • Guest
Few electrochemical problrms
« on: December 30, 2004, 10:31:57 PM »
1. During electroplating copper (for example), the impure copper is made the anode. After passing through electricity, some impurities such as gold, silver and platinum will settle at the bottom of the container. Why they don't like other metal ions, like zinc ions, oxidise themselves?

2. Chlorine gas is used to sterliise the water of swimming pool, but sodium hypochlorite (NaOCl) is more preferrable. Why?

Offline Donaldson Tan

  • Editor, New Asia Republic
  • Retired Staff
  • Sr. Member
  • *
  • Posts: 3178
  • Mole Snacks: +261/-12
  • Gender: Male
    • New Asia Republic
Re:Few electrochemical problrms
« Reply #1 on: December 30, 2004, 11:09:24 PM »
chlorine is a gas while sodium hypochlorite is a powder. It is less hazardous to handle the powder than chlorine gas. Moreover, hypochlorite is the same active ingredient in aqueous chlorine that gives its oxidising power that kills bacteria.

in electroplating copper, the more reactive metal dissolves in the electrolyte. Copper in the impure metal block is more reactive than the other metal present.
"Say you're in a [chemical] plant and there's a snake on the floor. What are you going to do? Call a consultant? Get a meeting together to talk about which color is the snake? Employees should do one thing: walk over there and you step on the friggin� snake." - Jean-Pierre Garnier, CEO of Glaxosmithkline, June 2006

Sponsored Links