September 25, 2021, 02:42:51 PM
Forum Rules: Read This Before Posting

### Topic: Normal Cubic Meter of Gas  (Read 42583 times)

0 Members and 1 Guest are viewing this topic.

#### sania

• New Member
•  • Posts: 4
• Mole Snacks: +0/-0 ##### Normal Cubic Meter of Gas
« on: July 07, 2007, 07:24:12 AM »
I read in gas processing industry the term Normal Cubic meter is used (Nm3) of gas,From normal i got an idea that normal means
A Normal Cubic Meter of a gas (Nm3) is the volume of that gas
measured under the standard conditions of 0 degrees Celsius,
and 1 atmosphere of pressure. As volume of a gas is inversely proportional to its pressure, and proportional to absolute temperature. How can we convert it in to room or process temperature. By using pv = nrt or some other method. how can we find the volume of gas. Want a detail answer from you. Thankyou
with kind regards

#### Borek ##### Re: Normal Cubic Meter of Gas
« Reply #1 on: July 07, 2007, 07:28:53 AM »
PV = nRT will do.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info, pH-meter.info

#### sania

• New Member
•  • Posts: 4
• Mole Snacks: +0/-0 ##### Re: Normal Cubic Meter of Gas
« Reply #2 on: July 07, 2007, 10:36:43 AM »
One more thing where we use Compressibility factor in PV=nRT. I mean in which condition we use Z1 and Z2. Thankyou
With kind regards

#### Montemayor

• Regular Member
•   • Posts: 26
• Mole Snacks: +9/-0
• Gender:  ##### Re: Normal Cubic Meter of Gas
« Reply #3 on: July 10, 2007, 12:38:30 PM »
Sania:

I understand you to say that you know the “Normal” volume of a gas and want to know the actual volume at a specific temperature and pressure (both different from “Normal” conditions).  If that is what you mean, then you can use the Ideal Gas Equation PV = nRT – but only if you know the molecular weight of the gas.  A more conventional method of converting the volume is to use the result of combing simultaneous equations:

V2 = V1 (Z2/Z1) (P1/P2) (T2/T1)

Where,
V2 = gas volume at the new condition, m3;
V1 = “Normal” gas volume, m3;
P1 = 1.0 atm, absolute;
P2 = pressure at the new condition, atm., absolute;
T1 = 273 oK;
T2 = absolute temperature at new condition, oK.

The above equation is derived dividing one of the following equations by the other:

P2 V2 = Z2 n R T2
P1 V1 = Z1 n R T1

I hope this helps you out.

#### mbeychok ##### Re: Normal Cubic Meter of Gas
« Reply #4 on: August 08, 2007, 05:09:22 PM »
Sania:

Art Montemayor's equation is perfectly correct.

But I would caution you on assuming that Normal conditions are always 0 degrees Celsius and 1 atmosphere. There is no universally accepted set of Standard or Normal temperature and pressure conditions.  I urge you to read this article:

http://en.wikipedia.org/wiki/Standard_conditions_for_temperature_and_pressure

For example, as  you will see in the above article, the International Union of Pure and Applied Chemistry (IUPAC) defines the standard conditions of temperature and pressure as 0 degrees Celsius and 100 kPa which is 1 bar (not 1 atmosphere) and has done so for a good many years.
Milton Beychok
(Visit me at www.air-dispersion.com)

#### technologist

• Full Member
•    • Posts: 148
• Mole Snacks: +6/-4 ##### Re: Normal Cubic Meter of Gas
« Reply #5 on: August 27, 2007, 06:21:29 AM »