March 29, 2024, 10:43:08 AM
Forum Rules: Read This Before Posting


Topic: Colligtive Properties Lab  (Read 16361 times)

0 Members and 1 Guest are viewing this topic.

Offline needhelp22

  • Regular Member
  • ***
  • Posts: 14
  • Mole Snacks: +0/-0
Colligtive Properties Lab
« on: January 27, 2008, 12:39:13 PM »
okay so im dong this lab using freezing point depression to find Freezing point of Naphthalene, Kf value of naph (change in T = molality * Kf) , and determining freezing point of sulfur when mixed with naph


the end of the lab asks me to find molar mass of sulfur. I do and i get 93 g / mol....my freinds tell me its suppose to be arond 250 g /mol... our teacher doesnt grade corectness since messing up on labs isn' too hard. I just need to understand the concept. Why does putting naph in a test tube, adding sulfur, melting the two powders, and finding their freezing point depression, change the molar mass of sulfur?

also we are required to find out the # of atoms of Sulfur per molecule....now i can do this if i had a compound given but i dont know the ratio of naph to sulfur at all. I found the mole of sulfur and therefore the atoms of sulfur in teh solution..but im stuck on where to go from there

Offline enahs

  • 16-92-15-68 32-7-53-92-16
  • Retired Staff
  • Sr. Member
  • *
  • Posts: 2179
  • Mole Snacks: +206/-44
  • Gender: Male
Re: Colligtive Properties Lab
« Reply #1 on: January 27, 2008, 12:49:04 PM »
What kind of Sulfur are we talking about here (I.E. was it some kind of sulfate)?
As the molar mass of sulfur is 32g/mol....

Offline needhelp22

  • Regular Member
  • ***
  • Posts: 14
  • Mole Snacks: +0/-0
Re: Colligtive Properties Lab
« Reply #2 on: January 27, 2008, 12:50:45 PM »
regular sulfur...but i got 93 g/mol as a molar mass at the end of it

Offline enahs

  • 16-92-15-68 32-7-53-92-16
  • Retired Staff
  • Sr. Member
  • *
  • Posts: 2179
  • Mole Snacks: +206/-44
  • Gender: Male
Re: Colligtive Properties Lab
« Reply #3 on: January 27, 2008, 12:58:15 PM »
Your question is all over. You do not melt two powders.

Start here.

Then maybe list your data and calculations.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27635
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Colligtive Properties Lab
« Reply #4 on: January 27, 2008, 01:00:03 PM »
What if sulfur doesn't dissolve as atomic?
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Valdorod

  • Regular Member
  • ***
  • Posts: 58
  • Mole Snacks: +13/-5
  • Gender: Male
    • El Paso Community College
Re: Colligtive Properties Lab
« Reply #5 on: January 27, 2008, 01:29:41 PM »
This is very common lab for second semester general chemistry in the US.  The purpose of the lab is for the student to come to the conclusion that Borek did.  If done correctly the student ends up with a molar mass that is then divided by the one given in the periodic table (32 g/mol) and S8 is obtained.  However, for your results 93/32 you end up with S3.  As your instructor/professor said, sometimes, it does not work as expected.

For this experimnet, graphing of data and correct extrapolation is crucial.  Also, this experiment, typically has two parts, where the first part has the student calculate the freezing points constant (Kf) of naphthalene first.  This value is used in part two of the calculations to find the molar mass of the solute (sulfur in this case)  If Kf is calculated incorrectly then the molar mass of sulfur would also be incorrect.

Students are usually taught abou the diatomic elements, H2, O2, N2, etc, in this experiment they find that other elements such as sulfur and phosphorus are not monoatomic in the free state.

Thus the student should arrives at the question/answer that Borek is proposing.  You can see James F. Hall Experimental Chemistry 6th edition for a description of this lab.

Valdo

Offline needhelp22

  • Regular Member
  • ***
  • Posts: 14
  • Mole Snacks: +0/-0
Re: Colligtive Properties Lab
« Reply #6 on: January 27, 2008, 01:31:31 PM »
http://www.bibliobase.com/Chemistry/Hall/pdf_doc/23.pdf

thats the lab we did...we only did CHIOCE 1

my calcs and data are right here.

Quote
Data

Data

Temperature (Degrees Celsius) Drops

Time   Naphthalene   Naphthalene/Dichlorobenzene   Naphthalene/Sulfur
30 Sec   85.1   79.8    81.0
60 Sec   80.1   76.5   76.2
90 Sec   77.2   75.1   73.9
120 Sec   75.3   74.8   73.1
150 Sec   74.9   74.2   72.9
180 Sec   74.3   73.9   72.8
210 Sec   74.1   73.0   72.8
240 Sec   73.9   72.5   72.8
270 Sec   73.5   72.0   72.8
300 Sec   73.2   71.0   72.1
330 Sec   73.0   70.2   71.8
360 Sec   73.0   68.9   71.0
390 Sec   72.9   67.5   70.9
420 Sec   72.9   66.0   70.4
450 Sec   72.4   64.5   69.7
480 Sec   72.1   62.9   68.0
510 Sec   71.8   61.0   66.5
540 Sec   70.8   69.2   64.2
570 Sec   70.8      60.9
600 Sec   70.8      56.8
630 Sec   70.8      
660 Sec   70.7      
690 Sec   68.4      
720 Sec   64.0      
750 Sec   60.0      

Part A Data Collected
Mass Of Test Tube   30.98 g
Mass of Test Tube + Naphthalene    40.10 g
Mass of Naphthalene Used    9.120 g
Freezing Point of Naphthalene (observation)   75.3 Degrees Celsius

Part B Data Collected
Mass of Test Tube and Naphthalene    40.20 g
Mass of Naphthalene    9.220 g
Mass of Test Tube, Naphthalene, Dichlorobenzene    41.04 g
Mass of Dichlorobenzene    .8400 g
Moles of Dichlorobenzene    5.753 X 10-3 mol C6H4Cl2
Freezing point of Naphthalene/ Dichlorobenzene (observation)   74.2 Degrees Celsius
DT from Part A and Part B    1.10 Degrees Celsius
Molality of Dichlorobenzene Solution   5.753 X 10-3 mol C6H4Cl2
Kf for Naphthalene    1.76 C Kg/ Mol

Part C Data Collected
Mass of Test Tube    30.97 g
Mass of Naphthalene and Test tube   40.07 g
Mass Naphthalene    9.100 g
Mass of Test Tube, Naphthalene, Sulfur    40.61 g
Mass of Sulfur    .5400 g
Freezing point of Naphthalene/ Sulfur (observation)   73.9 Degrees Celsius
DT from Part A and Part C   1.40 Degrees Celsius
Moles of Sulfur    7.23 X 10-2 mol
Molality of Sulfur Solution   .795 mol/kg
Molar Mass of Sulfur    74.6 g/mol
Number of Sulfur Atoms Per Molecule   4.35 X 1022 atoms of Sulfur

Calculations

Mass of Naphthalene Used in Part A:

Mass of Test Tube and Naphthalene – Mass of Test Tube = Mass of Naphthalene
40.10 grams – 30.98 grams = 9.120 grams of Naphthalene

Mass of Naphthalene In Part B:

40.20 g – 30.98 g = 9.220 grams of Naphthalene

Mass of Dichlorobenzene in Part B:

41.04 g – 40.20 grams = .8400 grams of Dichlorobenzene 

DT from Part A and Part B

T of Naphthalene – T of Naphthalene and Dichlorobenzene
75.3 Degrees Celsius – 74.2 Degrees Celsius = 1.10 Degrees Celsius

Molality of Dichlorobenzene Solution in Part B

Molality = moles of solute / kg of solvent
-   Moles of Dichlorobenzene
.8400 g C6H4Cl2   1 Mol C6H4Cl2   5.753 X 10-3 mol C6H4Cl2
   146 g C6H4Cl2   
-   Kg of Naphthalene
9.220 g Naphthalene   1 kg Naphthalene   .009220 kg of Naphthalene
   1000 g Naphthalene   


Molality = 5.753 X 10-3 mol C6H4Cl2 / .009220 kg of Naphthalene
Molality = .6240 mol/kg

Kf Value in Part B

DT = mKf 
1.10 Degrees Celsius = .6240 mol/kg (Kf)
Kf = 1.76 C Kg/ Mol

Mass of Naphthalene in Part C

40.07 g – 30.97 g = 9.100 grams of Naphthalene

Mass of Sulfur in Part C

40.61 g – 40.07 g = .5400 g of Sulfur

DT from Part A and Part C

75.3 Degrees Celsius – 73.9 Degrees Celsius = 1.4 Degrees Celsius

Molality of Sulfur Solution in Part C

DT = Kfm (Kf is used from Part B)
1.40 Degrees Celsius = 1.76 C Kg/ Mol (m)
Molality = .795 mol/kg

Molar Mass of Sulfur

Molar Mass = grams of sulfur / moles of sulfur
-   Moles of Sulfur
o   Molality = moles of solute/ kg of solvent
o   .795 mol/kg = moles of sulfur / .0091 kg of Naphthalene
o   moles of Sulfur = 7.23 X 10-2 mol

Molar Mass = .5400g Sulfur / 7.23 X 10-2 mol Sulfur
Molar Mass = 74.6 g / mol

Number of Sulfur Atoms Per Molecule

7.23 X 10-2 mol Sulfur   6.022 X 1023 atoms of Sulfur   4.35 X 1022 atoms of Sulfur
   1 mol Sulfur   



Offline needhelp22

  • Regular Member
  • ***
  • Posts: 14
  • Mole Snacks: +0/-0
Re: Colligtive Properties Lab
« Reply #7 on: January 27, 2008, 01:33:59 PM »
thanks valdorod...really helps...whts this s8 and s3 your talkin about...can u give me a general place where i can read about it. thanks.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27635
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Colligtive Properties Lab
« Reply #8 on: January 27, 2008, 01:39:49 PM »
S3 & S8. Like H2 or O3.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline needhelp22

  • Regular Member
  • ***
  • Posts: 14
  • Mole Snacks: +0/-0
Re: Colligtive Properties Lab
« Reply #9 on: January 27, 2008, 01:51:28 PM »
ohhhh wow..im stupid.....arite thnks for your help guys. so when sulfur is dissolved, theres 8 moles of it thats suppose to dissolve? but i only got 3 based on my data. I'm having a little hard time grasping hte why. when sulfur dissolves, we are saying that each molecule has 3 moles of sulfur? so solving for the # of atoms of sulfur per molecule would be 3 times 6.022 X10 to the 23rd.


Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27635
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Colligtive Properties Lab
« Reply #10 on: January 27, 2008, 02:02:29 PM »
we are saying that each molecule has 3 moles of sulfur?

 >:(

What is a mole, what is a molecule, what is an atom?
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline needhelp22

  • Regular Member
  • ***
  • Posts: 14
  • Mole Snacks: +0/-0
Re: Colligtive Properties Lab
« Reply #11 on: January 27, 2008, 02:10:15 PM »
okay...this is what im thinking (sry for the unclear stuff)

a molecule in this lab contains naph and sulfur. Theres is some compound that tells you. and in my case, that compound would have S3 in it. Which tells you that in that compound, theres 3 moles of sulfur compared to ___ moles of naph.

now im using compound and molecule as the same thing...is that wrong?

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27635
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Colligtive Properties Lab
« Reply #12 on: January 27, 2008, 02:16:21 PM »
a molecule in this lab contains naph and sulfur

No. There are separate molecules of naphthalen and separate molecules of sulfur. They are mixed. Do you know what is a chemical compound and what is a mixture?
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Valdorod

  • Regular Member
  • ***
  • Posts: 58
  • Mole Snacks: +13/-5
  • Gender: Male
    • El Paso Community College
Re: Colligtive Properties Lab
« Reply #13 on: January 27, 2008, 02:23:51 PM »
From the data that you have posted, I can tell that the experiment did not go as it should have gone.  The drop in freezing point for your mixtures was too small.  This has led to your calculation of Kf to be too small.  Nonetheless, you should always work with the data that you obtain.  From just skimming through your data and calculations everything seems ok, except at the end.

After you calculate the molar mass of sulfur from your data, you obtained 74.6 g/mol, all you need to do is divide by the mass of one mole of elemental sulfur.

Basically you have calculated the molar mass of Sx, and you are looking for "x".  To find x just divide 74.6(your mass) by 32 ( the mass of sulfur from PT) and you get 2.  Thus your result is S2.  So forget that S3 mentioned before, that was from the data on your first post.

If the experiment had worked as planned, the falue for Kf should have been about 7, and the molar mass of sulfur about 250.  However, always calculate using your data, do not work backwards in labs.

Valdo

Offline needhelp22

  • Regular Member
  • ***
  • Posts: 14
  • Mole Snacks: +0/-0
Re: Colligtive Properties Lab
« Reply #14 on: January 27, 2008, 02:42:25 PM »
a molecule in this lab contains naph and sulfur

No. There are separate molecules of naphthalen and separate molecules of sulfur. They are mixed. Do you know what is a chemical compound and what is a mixture?

mixture doesnt react with each other, compound does. I think i understand how many atoms there are now....i still dont understand why teh mass of sulfur increaseed or how it did, idk i just can't think of it in my mind correctly.

Sponsored Links