May 17, 2022, 06:00:58 AM
Forum Rules: Read This Before Posting

Topic: Absorbances  (Read 3649 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
« on: April 01, 2005, 01:15:56 PM »
7. The absorbances at a particular wavelength of a set of known concentration solutions was measured on a spectronic 20.  A plot of concentration vs. absorbance gave a slope of 2.100 x 10-4 and an intercept of approximately zero.  What is the value of the molar extinction coefficient (molar absorbivity, E) at the wavelength?
a. 2.128 x 10-4
b. 6120
c. 2.100x10-4
d. 4762
e. 4700

The answer is "a"

I have no clue how to solve it.... ???

Offline eugenedakin

  • Oilfield Consulting Chemist
  • Retired Staff
  • Full Member
  • *
  • Posts: 658
  • Mole Snacks: +88/-2
  • Gender: Male
  • My desk agrees with the law of entropy
    • Personal Website
« Reply #1 on: April 18, 2005, 09:47:42 AM »
Hello Integral0,

It appears that there is insufficient information to derive a reasonable conclusion.  Here are a  few questions that I have:
1) What is the intercept if it is approximately zero (is an actual value provided?)
2) What are the molar concentration measured?

The reason why I ask these questions are:

1) given: A/E= molar concentration, if the molar concentration is 1.0 at the given absorbance, then the calculated value is 2.100x10-4.  If you are given a different molar concentration, then this would change the value.
2) if the intercept is not zero, this will change the slope value (it could explain the difference between 2.128x10-4 and 2.100x10-4)

I hope this helps,

Eugene Dakin Ph.D., P.Chem.
There are 10 kinds of people in this world: Those who understand binary, and those that do not.

Sponsored Links