April 22, 2019, 12:24:55 PM
Forum Rules: Read This Before Posting


Topic: Buffert pH  (Read 5002 times)

0 Members and 1 Guest are viewing this topic.

Offline hahahanna

  • Regular Member
  • ***
  • Posts: 23
  • Mole Snacks: +0/-0
Buffert pH
« on: August 04, 2009, 03:45:27 PM »
Hi!

im going to do a buffer with C6H5COOH and with NaOH. I solved 1,32 g C6H5COOH in water then i establish 25 ml, 1,00M NaOH, and then i dilute with water too 200 ml. Now im going to calculate pH.

With the things i know I can calculate nC6H5COOH = m/Mw= 0,0109 mol
and nNaOH=c*V=0,0024 mol

How do i calculate the pH if my solvent was dilute with water too 200ml?
but what formula will i used after that?
pH=pKa+log [A]/[HA]??


Thanks for answers.


Offline plankk

  • Full Member
  • ****
  • Posts: 150
  • Mole Snacks: +20/-4
  • Gender: Female
Re: Buffert pH
« Reply #1 on: August 05, 2009, 06:44:50 AM »
but what formula will i used after that?
pH=pKa+log [A]/[HA]??

Yes. And in this equation you have symbols like that [X]. It means the molar concentration of X's molecule/ion.

Offline hahahanna

  • Regular Member
  • ***
  • Posts: 23
  • Mole Snacks: +0/-0
Re: Buffert pH
« Reply #2 on: August 05, 2009, 04:46:29 PM »
CH3COOH + OH- :rarrow:H2O+CH3COO-

mCH3COOH=1,32 g
MwCH3COOH=122 g/mol

nCH3COOH=0,0108 mol

cNaOH=1,00 M
VNaOH=24*10-3

nNaOH=0,0024 mol


Because i have a new volume, 200ml i do like this:

n=c*V  :rarrow: c=n/V
0,0108 mol/200*10-3=0,054 M

and i do the same with NaOH

n=c*V  :rarrow: c=n/V
0,0024 mol/200*10-3=0,12 M



After that i looked up pKa for CH3COOH=4,19


pH=4,19+log (0,12/0,054) = 4,54

Answer: pH 4,45


Is this correct??


Offline plankk

  • Full Member
  • ****
  • Posts: 150
  • Mole Snacks: +20/-4
  • Gender: Female
Re: Buffert pH
« Reply #3 on: August 06, 2009, 01:38:57 AM »
cNaOH=1,00 M
VNaOH=24*10-3

nNaOH=0,0024 mol

Here is a mistake. Try to caluculate one more time nNaOH.

Offline hahahanna

  • Regular Member
  • ***
  • Posts: 23
  • Mole Snacks: +0/-0
Re: Buffert pH
« Reply #4 on: August 06, 2009, 03:56:11 AM »
CH3COOH + OH- :rarrow:H2O+CH3COO-

mCH3COOH=1,32 g
MwCH3COOH=122 g/mol

nCH3COOH=0,0108 mol

cNaOH=1,00 M
VNaOH=24*10-3

nNaOH=0,024 mol



Because i have a new volume, 200ml i do like this:

n=c*V   c=n/V
0,0108 mol/200*10-3=0,054 M

and i do the same with NaOH

n=c*V   c=n/V
0,024 mol/200*10-3=0,12 M



After that i looked up pKa for CH3COOH=4,19


pH=4,19+log (0,12/0,054) = 4,54

Answer: pH 4,45



--- I saw that i caluculate with right NaOH (0,024mol)
But i missed it in the beginning, but it is right now?
 :)

Offline hahahanna

  • Regular Member
  • ***
  • Posts: 23
  • Mole Snacks: +0/-0
Re: Buffert pH
« Reply #5 on: August 06, 2009, 06:14:56 PM »
So is this right that  have done?

Because i have another question. The solution i calculated the pH will be called  "Solution A".
But now im going to calcultare the pH again but now i will have 20*10-3 ml of "solution A", and then i will add 1*10-3 , 1,00 M NaOH to make a new solution (solution B).

So, how will I do here?
I have n CH3COOH and i have n NaOH.
but how will I add this together to get out 20 ml solutions A and then mix it with NaOH again????

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 6356
  • Mole Snacks: +461/-78
  • Gender: Male
Re: Buffert pH
« Reply #6 on: August 07, 2009, 04:53:42 AM »
20*10-3 ml
???
AWK

Offline hahahanna

  • Regular Member
  • ***
  • Posts: 23
  • Mole Snacks: +0/-0
Re: Buffert pH
« Reply #7 on: August 07, 2009, 05:18:57 AM »
Sorry,

i mean 20 ml Solution A och 1 ml NaOH.

Sponsored Links