March 28, 2024, 05:11:23 PM
Forum Rules: Read This Before Posting


Topic: Creating a soft, pourable foam  (Read 4595 times)

0 Members and 1 Guest are viewing this topic.

Offline kcr357

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Creating a soft, pourable foam
« on: January 06, 2010, 09:51:32 PM »
How could I make either
a. a binary type liquid that is would dry to about the same consistency as upholstery foam
b. a single liquid that would air dry; perhaps with voc to above specs?
Any ideas? 

Offline PolymerKnowHow

  • Regular Member
  • ***
  • Posts: 45
  • Mole Snacks: +2/-0
Re: Creating a soft, pourable foam
« Reply #1 on: January 07, 2010, 01:31:39 PM »
Upholstery foam is made from a two part mixture (actually its more than two).
Google polyurethane foams.

Sponsored Links