January 16, 2022, 07:52:04 PM
Forum Rules: Read This Before Posting

0 Members and 1 Guest are viewing this topic.

zhangyalun

• Very New Member
• Posts: 1
• Mole Snacks: +0/-0
Adding Ice to Water, Calculate Final Temperature
« on: January 10, 2010, 06:40:26 PM »
A 20.0-g sample of ice at -10.0 oC is mixed with 100.0g of water at 80.0 oC. Calculate the final temperature of the mixiture assuming no heat loss to the surroundings. The heat capacities of H2O(s) and H2O(l) are 2.08 and 4.18J/goC respectively, and the enthalpy of fusion for ice is 6.02kJ/mol.

I understand that I have to make the energy gained by the ice equal to the energy lost by the liquid water, but I don't know what to put on each side due to the phase changes. Where do I use enthalpy of fusion?

MrTeo

• Chemist
• Full Member
• Posts: 312
• Mole Snacks: +31/-9
• Gender:
Re: Adding Ice to Water, Calculate Final Temperature
« Reply #1 on: January 11, 2010, 11:44:34 AM »
The entalphy of fusion (or simply heat of fusion) is the amount of energy needed to melt a mol of ice... use it wisely in the heat balance you described and that's all.
The way of the superior man may be compared to what takes place in traveling, when to go to a distance we must first traverse the space that is near, and in ascending a height, when we must begin from the lower ground. (Confucius)