May 31, 2020, 02:49:05 AM
Forum Rules: Read This Before Posting


Topic: retention time  (Read 4761 times)

0 Members and 1 Guest are viewing this topic.

Offline dnbwise

  • Regular Member
  • ***
  • Posts: 31
  • Mole Snacks: +1/-5
  • I'm a mole!
retention time
« on: July 18, 2005, 08:33:46 PM »
What does the retention time represent? In other words, what is its significance?

Offline lemonoman

  • Atmospheric
  • Chemist
  • Full Member
  • *
  • Posts: 607
  • Mole Snacks: +71/-8
  • Gender: Male
Re:retention time
« Reply #1 on: July 18, 2005, 11:38:41 PM »
It represents the amount of time an analyte is retained in a chromatographic separation.  :P

Hope that helps!

ruger1v

  • Guest
Re:retention time
« Reply #2 on: August 30, 2005, 03:32:37 PM »
when looking at a chromatogram it represents the time it takes the analyte to elude and can be viewed in the form of a peak....  

« Last Edit: August 30, 2005, 03:33:21 PM by ruger1v »

asqa

  • Guest
Re:retention time
« Reply #3 on: September 01, 2005, 12:46:58 AM »
Definition of retention time on the web is as below


The time it takes for the volume of water in a lake to exit through its outlet (ie, total volume/outlet flow = retention time).
www.epa.gov/glnpo/rptcong/1994/glossary.htm

t: The time taken by the analyte peak to reach the detector after sample introduction is called the retention time. A more accurate measure of the retention time of an analyte is obtained by subtracting from this value the time taken for an unretained solute to emerge from the column (ie, the dead time, t 0 ), resulting in the adjusted retention time, t’. The retention time is the most important parameter for component identification under set experimental conditions.
www.laballiance.com/la_info/support/hplc2.htm

time, usually in days, required for a volume of water equal to the reservoir capacity to move through the reservoir and be discharged downstream.
www.ncwater.org/About_DWR/Water_Projects_Section/Instream_Flow/glossary2.htm

is the amount of time in which a given set of data will remain available for restore. Some backup products rely on daily copies of data and measure retention in terms of days. Others retain a number of copies of data changes regardless of the amount of time.
en.wikipedia.org/wiki/Backups

The length of time required for a compound of component of a mixture to pass through a chromatographic column.
www.fire.org.uk/glossary.htm



Sponsored Links