March 28, 2024, 08:45:52 PM
Forum Rules: Read This Before Posting


Topic: Help Developing A Masterbatch  (Read 3072 times)

0 Members and 1 Guest are viewing this topic.

Offline onintwo

  • Very New Member
  • *
  • Posts: 1
  • Mole Snacks: +0/-0
Help Developing A Masterbatch
« on: June 02, 2010, 10:50:09 AM »
We want to produce a masterbatch that will have between 25% and 50% active ingredients in a carrier compatible with HDPE (and other PE). The active ingredients are two compounds, neither of which is polar, both are powders, both are difficult to handle (aversives), in a ratio of 90% and 10%, so that the masterbatch will be composed of 45% and 5% actives and 50% carrier. The percent of actives could go as low as 25% if necessary.

The molecular formula for the higher concentration active is C28H34N2O3.

The molecular formula for the lower concentration active is C17H27NO3

Our question is what can be used as a carrier and how would we process these materials to get flakes, pellets or prill that can be handled?

If this question is in the wrong forum or violates a rule, I apologize. Let me know and will direct my question elsewhere.

Sponsored Links