March 28, 2024, 04:29:43 PM
Forum Rules: Read This Before Posting


Topic: how can I test 4 lead paint  (Read 7219 times)

0 Members and 1 Guest are viewing this topic.

Offline macci

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
how can I test 4 lead paint
« on: September 03, 2010, 12:52:20 PM »
hiya...its been a looong time since chem a'level...I strongly suspect that I have lead paint all over my flat (I've recently started stripping off the wall paper) I know u can buy kits to test, but if i can do it some other way it would wud b more fun n cheaper 2..ha ha
« Last Edit: September 03, 2010, 01:32:55 PM by macci »

Offline macci

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Re: how can I test 4 lead paint
« Reply #1 on: September 03, 2010, 01:43:00 PM »

hiya...its been a looong time since chem a'level...I strongly suspect that I have lead paint all over my flat (I've recently started stripping off the wall paper) I know u can buy kits to test, but if i can do it some other way it would wud b more fun n cheaper 2..ha ha
[/quote]

Offline Stepan

  • Chemist
  • Full Member
  • *
  • Posts: 358
  • Mole Snacks: +39/-4
  • Gender: Male
  • Air Chemistry Man
    • Supplier of air sampling equipment and services
Re: how can I test 4 lead paint
« Reply #2 on: September 07, 2010, 12:16:39 PM »
Send it to a lab. They will do it for you (for fee). Kits do not work of paint, and are not accepted as results.

Offline vmelkon

  • Chemist
  • Full Member
  • *
  • Posts: 474
  • Mole Snacks: +28/-10
  • Gender: Male
Re: how can I test 4 lead paint
« Reply #3 on: September 10, 2010, 09:34:46 PM »
I think lead based white paint contains PbSO4 which doesn't dissolve much in water but you can still test it by adding water, then add a minute quantity of H2S (hydrogen sulfide) and it should turn black indicating that the less solutble PbS has formed.

Offline Stepan

  • Chemist
  • Full Member
  • *
  • Posts: 358
  • Mole Snacks: +39/-4
  • Gender: Male
  • Air Chemistry Man
    • Supplier of air sampling equipment and services
Re: how can I test 4 lead paint
« Reply #4 on: September 11, 2010, 08:00:46 AM »
If I may again :-\. Fully cured paint:
a) is insoluble in water and most acids
b) other metals give the same black colour when in contact with H2S
c) Every single paint I tested over the last 10 years contains some lead. The question is not "does it contains the let?" (because it does). The question is how much. To be classified as "lead paint" material must contain 0.5% of lead or more. 0.49% is already not a "lead paint". Test kits or qualitative reactions cannot provide the accuracy you need. This why, as I mentioned earlier, that the test cannot be done without laboratory help (by the way, laboratory test in USA and Canada will cost you less than a test kit)   

If your house was built before 1980, it likely contains lead paint. After 1982 lead paint was not used. 

Sponsored Links