September 23, 2019, 01:14:09 AM
Forum Rules: Read This Before Posting


Topic: anode  (Read 4992 times)

0 Members and 1 Guest are viewing this topic.

Offline vmelkon

  • Chemist
  • Full Member
  • *
  • Posts: 470
  • Mole Snacks: +28/-10
  • Gender: Male
anode
« on: July 02, 2011, 08:17:06 AM »
I have tried graphite from pens but these tend to break up in chunks after a while, whether I do electrolysis in water or electrolysis of a salt.
Why does the graphite break up?
Unfortunately, I can't remelt the graphite and cast it.

I have tried silicon, but to my surprise, it breaks up into chuncks as well. Also, it is not as good a conductor as graphite.

I found these small graphite pieces that are rod shaped. They seem to last longer than graphite from pens and the diameter is higher but again, no good.

So what is the deal? Why does graphite break up?
Should I try graphite rods from C or D cell ordinary zinc batteries?

Offline billnotgatez

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 3800
  • Mole Snacks: +209/-55
  • Gender: Male
Re: anode
« Reply #1 on: July 04, 2011, 06:43:13 AM »
I have seen some success using cell battery carbon rod centers. I bet they still break down after a while. I also would bet that pencils have some other stuff in it that is not carbon.
The standard classroom systems I have seen use platinum wire electrodes with distilled water and a few drops of sulfuric acid.

Offline 408

  • Chemist
  • Full Member
  • *
  • Posts: 792
  • Mole Snacks: +102/-30
Re: anode
« Reply #2 on: July 04, 2011, 12:21:12 PM »
welding electrodes

Offline vmelkon

  • Chemist
  • Full Member
  • *
  • Posts: 470
  • Mole Snacks: +28/-10
  • Gender: Male
Re: anode
« Reply #3 on: July 11, 2011, 08:52:20 PM »
Isn't welding electrodes made mostly of tungsten? Wouldn't it form the oxide or chloride depending on what you electrolyze?

Offline 408

  • Chemist
  • Full Member
  • *
  • Posts: 792
  • Mole Snacks: +102/-30
Re: anode
« Reply #4 on: July 12, 2011, 01:13:03 AM »
I found graphite with thin layer of copper.  peel copper and you have a foot of 1cm diameter graphite.  I ran all my chlorate cells with these.

Sponsored Links