March 28, 2024, 07:32:10 AM
Forum Rules: Read This Before Posting


Topic: Mercury electrode oxyde?  (Read 5114 times)

0 Members and 1 Guest are viewing this topic.

Offline hohenheim

  • New Member
  • **
  • Posts: 5
  • Mole Snacks: +0/-0
Mercury electrode oxyde?
« on: August 01, 2011, 02:27:15 PM »
Here is what I did for a chlorite:



When I pass 3v through the solution, mercury forms a non conductive layer so the current stopped to flow.
At first I tought it was an oxyde of some metal that formed an amalgam with mercury, I removed it but it continued to form indefinitely.
Since the MgO has an orangish color. what could be the dark grey scrap I got?


Thank you

Offline hohenheim

  • New Member
  • **
  • Posts: 5
  • Mole Snacks: +0/-0
Re: Mercury electrode oxyde?
« Reply #1 on: August 04, 2011, 04:33:21 PM »
Is it that hard?

Offline DevaDevil

  • Chemist
  • Full Member
  • *
  • Posts: 690
  • Mole Snacks: +55/-9
  • Gender: Male
  • postdoc at ANL
Re: Mercury electrode oxyde?
« Reply #2 on: August 05, 2011, 11:01:02 AM »
yes it is, as "brine" is not a very well-defined system. was it pure sodium chloride solution? mixed metal-chlorides, or seawater, which has tons of ions of all kinds in it?

3 volt is a large current, and so there are many reactions that may happen. yes, mercury oxide is orange, but for example mercury sulfate, mercury chloride etc. are white.
As I said, many options available

Offline hohenheim

  • New Member
  • **
  • Posts: 5
  • Mole Snacks: +0/-0
Re: Mercury electrode oxyde?
« Reply #3 on: August 08, 2011, 03:54:07 PM »
Thanks for the information, I didn't tought about the voltage I'll try with 1.6v.

I used a distilled water saturated with table salt.

Offline Benzenelover

  • Regular Member
  • ***
  • Posts: 33
  • Mole Snacks: +0/-2
  • Gender: Male
Re: Mercury electrode oxyde?
« Reply #4 on: August 09, 2011, 12:43:21 AM »
Was the salt iodized?
I've been studying chemistry for a few months online. I'm here to learn new things, and share what I've already learned.

Offline hohenheim

  • New Member
  • **
  • Posts: 5
  • Mole Snacks: +0/-0
Re: Mercury electrode oxyde?
« Reply #5 on: August 09, 2011, 09:55:02 AM »
Yes I suppose, does it matter? since only a tiny quantity is present, Like I said the layer keeps forming until all the mercury is transformed.

Offline DevaDevil

  • Chemist
  • Full Member
  • *
  • Posts: 690
  • Mole Snacks: +55/-9
  • Gender: Male
  • postdoc at ANL
Re: Mercury electrode oxyde?
« Reply #6 on: August 09, 2011, 01:57:48 PM »
mercury iodide is very insoluble, that is why it matters. if mercury cations are formed, iodide in solution may cause it to crystallize out as mercury iodide.

solubility product of Hg2I2: 5.33 x 10-29
solubility product of HgI2: 2.82 x 10-29

Offline Benzenelover

  • Regular Member
  • ***
  • Posts: 33
  • Mole Snacks: +0/-2
  • Gender: Male
Re: Mercury electrode oxyde?
« Reply #7 on: August 09, 2011, 02:15:11 PM »
Not to mention iodized salt tends to have all kinds of other contaminants, such as anti caking agents.
I've been studying chemistry for a few months online. I'm here to learn new things, and share what I've already learned.

Offline hohenheim

  • New Member
  • **
  • Posts: 5
  • Mole Snacks: +0/-0
Re: Mercury electrode oxyde?
« Reply #8 on: August 09, 2011, 10:00:19 PM »
I understand, So this is necessarly due to contaminants in the electrolyte?
So is there any other way making chlorine? I tried stainless steel but it degrades quickly, the graphite too.

Offline Hunter2

  • Sr. Member
  • *****
  • Posts: 2153
  • Mole Snacks: +162/-47
  • Gender: Male
  • Vena Lausa moris pax drux bis totis
Re: Mercury electrode oxyde?
« Reply #9 on: August 10, 2011, 12:56:19 AM »
Quote
3 volt is a large current,

Volt is not a current, current is measured in Ampere.

For this problem I would suggest to measure the current with an Amperemeter in series.
The voltage is only the force to drive the current through.

Offline DevaDevil

  • Chemist
  • Full Member
  • *
  • Posts: 690
  • Mole Snacks: +55/-9
  • Gender: Male
  • postdoc at ANL
Re: Mercury electrode oxyde?
« Reply #10 on: August 10, 2011, 09:55:43 AM »
Quote
3 volt is a large current,

Volt is not a current, current is measured in Ampere.

For this problem I would suggest to measure the current with an Amperemeter in series.
The voltage is only the force to drive the current through.

my bad, slip of the keys

Sponsored Links