May 29, 2020, 03:48:58 AM
Forum Rules: Read This Before Posting


Topic: Adhesive Questions - Need Assistance  (Read 6686 times)

0 Members and 1 Guest are viewing this topic.

Offline AlfaCh

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Adhesive Questions - Need Assistance
« on: March 15, 2012, 04:35:27 PM »
1) How does one make spray aerosol pressure sensitive adhesive?

2) What kind of adhesive will adhere to HDPE (High Density Polyethylene)?

Offline jaspevacek

  • Regular Member
  • ***
  • Posts: 29
  • Mole Snacks: +5/-0
    • It's the Rheo Thing
Re: Adhesive Questions - Need Assistance
« Reply #1 on: March 16, 2012, 08:41:34 AM »
1) PSA + solvent + propellant.

2) You do realize that you are almost asking what will stick to Teflon? You do have a few options. 1) Use a rubber-based adhesive. 2) Corona or flame-treat the HDPE 3) Use a primer first, such as chlorinated PE.

Offline AlfaCh

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Re: Adhesive Questions - Need Assistance
« Reply #2 on: March 16, 2012, 10:54:43 AM »
1) PSA + solvent + propellant.

2) You do realize that you are almost asking what will stick to Teflon? You do have a few options. 1) Use a rubber-based adhesive. 2) Corona or flame-treat the HDPE 3) Use a primer first, such as chlorinated PE.

Thanks for your help :)

Offline jaspevacek

  • Regular Member
  • ***
  • Posts: 29
  • Mole Snacks: +5/-0
    • It's the Rheo Thing
Re: Adhesive Questions - Need Assistance
« Reply #3 on: March 19, 2012, 10:07:19 AM »
Glad the answer was helpful.  Adhesive questions usually have lots of subtleties that can make answering questions about them difficult without having to write entire books.

Sponsored Links