March 29, 2024, 07:58:58 AM
Forum Rules: Read This Before Posting


Topic: Given Fe2(SO4)3 2%(w/w) , does that mean this is the %(w/w) of two Fe?  (Read 4758 times)

0 Members and 1 Guest are viewing this topic.

Offline 123hello123

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
If it does, does that mean my results (about 3.7) is correct (this is the amount of Fe only, not Fe2(SO4)3)- due to some spillage, I know that it should be under 2%(w/w).

Offline Arkcon

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7367
  • Mole Snacks: +533/-147
If the label doesn't say x% Fe, then it means the sample is 2% Fe2(SO4)3 and 98% dirt or powdered stone or something.  I don't know how you've computed the Fe amount, but you have to compensate as above.
Hey, I'm not judging.  I just like to shoot straight.  I'm a man of science.

Offline 123hello123

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
I'm a little confused as to what you mean. I wanted to know, with 2%(w/w) Fe2(SO4)3 in mind, if the amount of Fe that I calculated is sensible? I used UV-vis spec. to get my raw data.

Offline Arkcon

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7367
  • Mole Snacks: +533/-147
Ah.  Sorry, I got it backwards.  OK, experimentally, you've determined the Fe concentration is 2%. Now you want to report % Fe2(SO4)3?  Yeah, you will have to convert that.
Hey, I'm not judging.  I just like to shoot straight.  I'm a man of science.

Sponsored Links