April 26, 2024, 09:28:28 PM
Forum Rules: Read This Before Posting


Topic: Frezing of water at below 273 K (0 C)  (Read 7814 times)

0 Members and 1 Guest are viewing this topic.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27664
  • Mole Snacks: +1801/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Frezing of water at below 273 K (0 C)
« Reply #15 on: June 07, 2012, 04:27:26 AM »
But in my case there is no bulk water, but water consists of tiny waterdrops. 100 g water per m2 is only 0,1 mm water on average.

This is irrelevant. Water gets supercooled when there are no nucleation sites at which it could start to crystallize. From your description water is in contact with solids that provide plenty of nucleation sites.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Sponsored Links