November 06, 2024, 06:03:54 AM
Forum Rules: Read This Before Posting


Topic: Problem of the week - 30/07/2012  (Read 23310 times)

0 Members and 1 Guest are viewing this topic.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27838
  • Mole Snacks: +1811/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Problem of the week - 30/07/2012
« on: July 30, 2012, 01:01:00 PM »
When a 1.22 L reaction vessel made of glass was filled with a dry, corrosive gas, its weight increased by 10.2 13.6 g (edit: data corrected) (temperature in the lab was 21 °C). After adding a single drop of water reactor was closed with a manometer. After several hours pressure inside the reactor increased by exactly 50% and the inside surface of glass became matted, with a slight yellow tint. Yellow tint disappeared after the reactor was opened and flushed with a concentrated solution of NaOH.

Name the gas.

Note: I am in a vacation mode, preparing questions in memory and drawing equations on the beach sand*. Chances that I am mistaken are even higher than in a typical POTW.

*An utter lie, no sand here, only rocks. It makes the preparations even more difficult.
« Last Edit: August 14, 2012, 04:18:35 AM by Borek »
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Ann1234

  • Regular Member
  • ***
  • Posts: 63
  • Mole Snacks: +4/-0
  • Gender: Female
Re: Problem of the week - 30/07/2012
« Reply #1 on: July 30, 2012, 07:45:30 PM »
so far:
corrosive gas (A) + water = acid?? (yellow) + gas B

My initial thought is that the corrosive gas maybe a Nitrogen gas.

with the data available, and assuming that the initial pressure (P1) is caused by the gas A only, and the final pressure (P2) is caused by the gas B (product) only:

I have that: P2 = P1X3/2. Since Temp. an volume are constant=> applying the ideal gas law I got that:

Moles B/moles A = 3/2. 

I didn't go further since this maybe completely wrong --feedback???  ???

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27838
  • Mole Snacks: +1811/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Problem of the week - 30/07/2012
« Reply #2 on: August 01, 2012, 01:21:15 PM »
Assume glass is mainly SiO2.

Nitrogen is not corrosive, it is almost completely inert.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Ann1234

  • Regular Member
  • ***
  • Posts: 63
  • Mole Snacks: +4/-0
  • Gender: Female
Re: Problem of the week - 30/07/2012
« Reply #3 on: August 01, 2012, 03:12:21 PM »
Assume glass is mainly SiO2.

Nitrogen is not corrosive, it is almost completely inert.

sorry I meant a gas containing N element (an oxide like NX0Y)

Offline Ann1234

  • Regular Member
  • ***
  • Posts: 63
  • Mole Snacks: +4/-0
  • Gender: Female
Re: Problem of the week - 30/07/2012
« Reply #4 on: August 01, 2012, 05:10:04 PM »
is it HF?

since it reacts with silica when dissolved in water to form fluorosilicic acid (colorless to light yellow)

SiO2(s) + 6 HF(aq) → H2SiF6(aq) + 2 H2O(l)

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27838
  • Mole Snacks: +1811/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Problem of the week - 30/07/2012
« Reply #5 on: August 04, 2012, 02:26:58 PM »
Come on, you can do better than that. You have not even tried to check if your guess fits information given.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Ann1234

  • Regular Member
  • ***
  • Posts: 63
  • Mole Snacks: +4/-0
  • Gender: Female
Re: Problem of the week - 30/07/2012
« Reply #6 on: August 04, 2012, 02:46:42 PM »
Come on, you can do better than that. You have not even tried to check if your guess fits information given.

Negative. I actually tried and it didn't work  :'(. But I was not sure if I did it right as well. Now I know I did it right..so I won't post again until I have something that fits 100% with the info given- particularly the pressure, I can't think on something that fits with that.


Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27838
  • Mole Snacks: +1811/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Problem of the week - 30/07/2012
« Reply #7 on: August 06, 2012, 02:23:25 PM »
Extended for another week.

You are right about HF reacting with SiO2. But HF is not the original gas.

What can you calculate using given information about weight?
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Ann1234

  • Regular Member
  • ***
  • Posts: 63
  • Mole Snacks: +4/-0
  • Gender: Female
Re: Problem of the week - 30/07/2012
« Reply #8 on: August 06, 2012, 07:20:19 PM »
well - I can calculate the density of the gas

d=m/v= 10.2/1.22 = 8.36 g/L

Offline Ann1234

  • Regular Member
  • ***
  • Posts: 63
  • Mole Snacks: +4/-0
  • Gender: Female
Re: Problem of the week - 30/07/2012
« Reply #9 on: August 06, 2012, 09:09:03 PM »
okay- I finally found a gas that fits with:

-pressure change
-color

but still it doesn't fit with the density (I am comparing at room temp. and 1 atm pressure, from online tables)

if I find a gas that fits with the density---I'll post everything at once...

Offline Ann1234

  • Regular Member
  • ***
  • Posts: 63
  • Mole Snacks: +4/-0
  • Gender: Female
Re: Problem of the week - 30/07/2012
« Reply #10 on: August 06, 2012, 09:41:03 PM »

okay-I won't have time to continue with this problem for a few days, so I post what I tried if it helps to another person:


I tried with WF6, is a corrosive gas, density about 12 (that doesn't match) but it reacts with water to give:

WF6 + 3H20 = WO3 (yellow, dissolves in NaOH) + 6HF

Then HF produced reacts with SiO2:

4HF + SiO2 = SiF4 + 2H20

according to stoichiometry I got that, for each mol of WF6 that reacts, we get 3/2 moles SiF4 gas, that would give me the 50% increase in pressure.


 


Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27838
  • Mole Snacks: +1811/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Problem of the week - 30/07/2012
« Reply #11 on: August 08, 2012, 02:15:58 PM »
density about 12 (that doesn't match)

Think it over.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Ann1234

  • Regular Member
  • ***
  • Posts: 63
  • Mole Snacks: +4/-0
  • Gender: Female
Re: Problem of the week - 30/07/2012
« Reply #12 on: August 08, 2012, 05:09:39 PM »
density about 12 (that doesn't match)

Think it over.

well since I saw the problem I wondered about at which pressure we were working, but I was afraid to ask since that could be a hint  ;D

I am thinking that if we are talking about a low pressure reaction vessel that can lower the gas density to 8.36 (not sure on this- I must say I don't remember much about under pressure vessels)
It's the only I can think of so far.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27838
  • Mole Snacks: +1811/-412
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Problem of the week - 30/07/2012
« Reply #13 on: August 13, 2012, 12:23:20 PM »
You can assume pressure around 1 atm.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Ann1234

  • Regular Member
  • ***
  • Posts: 63
  • Mole Snacks: +4/-0
  • Gender: Female
Re: Problem of the week - 30/07/2012
« Reply #14 on: August 13, 2012, 09:10:25 PM »
You can assume pressure around 1 atm.

ok so molar mass gas = 201.79 g/mol

Sponsored Links