March 28, 2024, 12:26:24 PM
Forum Rules: Read This Before Posting


Topic: Problem of the week - 03/12/2012  (Read 15739 times)

0 Members and 1 Guest are viewing this topic.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27637
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Problem of the week - 03/12/2012
« on: December 03, 2012, 05:59:39 AM »
Concentration of H+ in a solution of a weak acid can be calculated from the simplified equation

[tex][H^+] = \sqrt{C K_a}[/tex]

However, there is a condition that must be fulfilled for this equation to work. Can you name this condition?

Interestingly, when used for a 0.57 nM solution of the acetic acid this equation gives a correct answer, even if the condition is not fulfilled. Can you explain this result?
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: Problem of the week - 03/12/2012
« Reply #1 on: December 03, 2012, 06:48:01 AM »
Dissociation of water neglected?

[tex]
K_a.C >> K_w
[/tex]

Also,

[tex]
C >> K_a
[/tex]
« Last Edit: December 03, 2012, 07:15:20 AM by curiouscat »

Offline Rutherford

  • Sr. Member
  • *****
  • Posts: 1868
  • Mole Snacks: +60/-29
  • Gender: Male
Re: Problem of the week - 03/12/2012
« Reply #2 on: December 03, 2012, 09:52:04 AM »
Probably C>>Ka as curiouscat said, or other way (maybe better because you can check it) to check if the dissociation degree is under 5% ([H+]/C*100).

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: Problem of the week - 03/12/2012
« Reply #3 on: December 03, 2012, 10:38:17 AM »
                       HA  ::equil:: H+ + A-

At equilibrium   CA0-x         x           x


                      H2O  ::equil:: H+ + OH-

At equilibrium     something        y              y

[tex]
K_w=[H^+][OH^-] \\
K_w=(x+y)y           (Eq. a)          \\

K_a=\frac{[H^+][A^-]}{[HA]} \\
Ka=\frac{(x+y).x}{C_{A0}-x}          (Eq. b) \\

K_w=10^{-14} \\
K_a=1.8 \times 10^{-5}  \\
C_{A0}=0.57 \times 10^{-9} \\

[/tex]

Solve (Eq. a) and (Eq. b) simultaneously in x and y to get

[tex]
x=5.6684 \times 10^{-10} \\
y=9.9717 \times 10^{-8}  \\

[H^+] = x+y = 1.0028 \times 10^{-7} \\
[/tex]

By Borek's shortcut
[tex]
[H^+] = \sqrt{C_{A0} \times K_a} = 1.013 \times 10{-7} \\
[/tex]
QED?

Two wrongs make a right? The Kw effect compensates for neglecting the HA dissociation?

An analytical closed form solution might be more elegant though.....Still working on it.
« Last Edit: December 03, 2012, 11:05:40 AM by curiouscat »

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27637
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Problem of the week - 03/12/2012
« Reply #4 on: December 06, 2012, 10:08:30 AM »
check if the dissociation degree is under 5% ([H+]/C*100).

That's the one I was thinking about.

Two wrongs make a right?

Something like that.

For sufficiently diluted solution pH is close to 7.0. For every Ka you can find such Ca, that [itex]\sqrt {K_aC_a}=10^{-7}[/itex]. It is a completely meaningless fact  >:D

http://www.chembuddy.com/?left=pH-calculation&right=pH-weak-acid-base

Scroll down to the image, explanation is in the text.

ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: Problem of the week - 03/12/2012
« Reply #5 on: December 06, 2012, 10:44:58 AM »
As an aside, I think these days when numerical solvers are so easily available I rather set up the full problem than dealing with approximations and when they hold.

Two non-linear eqns. in two unknowns. Solve! Saves me the headaches.  ;D

Offline kevinkevin

  • Regular Member
  • ***
  • Posts: 75
  • Mole Snacks: +2/-2
Re: Problem of the week - 03/12/2012
« Reply #6 on: December 13, 2012, 07:21:51 PM »
  At what point in your chemistry career are you suppose to be able to answer these? 

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27637
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Problem of the week - 03/12/2012
« Reply #7 on: December 14, 2012, 05:00:29 AM »
Hard to say, as a lot depends on the educational system and these are different in different countries.

I believe I was about 17 when I learned enough to be able to answer this question. 19 in the worst case.

Math and ideas behind are relatively simple, the only problem is most people don't get into the details.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: Problem of the week - 03/12/2012
« Reply #8 on: December 14, 2012, 06:46:38 AM »
Hard to say, as a lot depends on the educational system and these are different in different countries.

I believe I was about 17 when I learned enough to be able to answer this question. 19 in the worst case.

Math and ideas behind are relatively simple, the only problem is most people don't get into the details.

I was probably doing this better at 21 than I am now. Being in touch helps. Most higher education and careers specialize you and one tends to get rusty on the things not in his domain. Sad, in a way. Well, Borek's problems are helping me sandpaper my brain. :) Thanks Borek!

Offline kevinkevin

  • Regular Member
  • ***
  • Posts: 75
  • Mole Snacks: +2/-2
Re: Problem of the week - 03/12/2012
« Reply #9 on: December 14, 2012, 12:50:38 PM »
  I realized I could have worded my question better.  How many years of chemistry does it take to answer these questions?  Should a first year student be able to answer these?  (Honors Chem in high school, all the chem classes now are full before I get to register, so I have to study by myself to keep myself as sharp as I can.)

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27637
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Problem of the week - 03/12/2012
« Reply #10 on: December 14, 2012, 02:35:08 PM »
I realized I could have worded my question better.  How many years of chemistry does it take to answer these questions?

GenChem101 should be perfectly enough.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Sponsored Links