March 28, 2024, 09:11:03 AM
Forum Rules: Read This Before Posting


Topic: UV detection of organic-N  (Read 1931 times)

0 Members and 1 Guest are viewing this topic.

Offline alrob8a

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
UV detection of organic-N
« on: January 18, 2013, 12:47:30 AM »
Hi guys,

At work I am doing a whole range of potential N mineralisation experiments on soils, and have been trying to nut out one of the methods.

Extract soil with 0.01M NaHCO3. Run through spectro at 200nm and 260nm.

200nm is a function of nitrate as well as organic N.
260nm is a function of organic N.

The difference gives me nitrates, which is what I'm after.

Easy peasy make standards up with KNO3 for nitrates, but how do I go about understanding the organic-N fraction? I tried making up standards with urea but found no absorption at 260nm.

Any help would be fantastic :)

Alister.

Offline Stepan

  • Chemist
  • Full Member
  • *
  • Posts: 358
  • Mole Snacks: +39/-4
  • Gender: Male
  • Air Chemistry Man
    • Supplier of air sampling equipment and services
Re: UV detection of organic-N
« Reply #1 on: January 18, 2013, 09:59:55 AM »
Not sure if this method would work at all. 99% of all chemicals adsorb at 200 nm and therefore will give you positive interference. About 90% of chemicals also adsorb at 260 nm and therefore will give you an error reading once more.

The method you quoted is part of IC-UV method, where chemicals and ions are first separated by chromatography, and after detected with UV.

Sponsored Links