March 28, 2024, 06:17:54 PM
Forum Rules: Read This Before Posting


Topic: Chemical Engineering - pipe sizing  (Read 3821 times)

0 Members and 1 Guest are viewing this topic.

Offline fomula.crazy

  • Very New Member
  • *
  • Posts: 1
  • Mole Snacks: +0/-1
Chemical Engineering - pipe sizing
« on: November 20, 2012, 10:01:16 AM »
I tried the chemresources and got a moderator who wanted to CHARGE me for answering. Sooo disssapointed,
PS its really urgent, please assist.

Question is,
a heating tank ( approx 1.2m tall and 0.86m Diameter) will have a flow of 1000kg per hour of vegetable oil running through. It needs heating of 50 to 65 deg. With about 3 bar steam running through the heating coil.
What length should the coil would be sufficient? Calculation in SI units


Tell me what else info you need?

Offline sjb

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 3652
  • Mole Snacks: +222/-42
  • Gender: Male
Re: Chemical Engineering - pipe sizing
« Reply #1 on: November 20, 2012, 10:40:04 AM »
I tried the chemresources and got a moderator who wanted to CHARGE me for answering. Sooo disssapointed,
PS its really urgent, please assist.

Question is,
a heating tank ( approx 1.2m tall and 0.86m Diameter) will have a flow of 1000kg per hour of vegetable oil running through. It needs heating of 50 to 65 deg. With about 3 bar steam running through the heating coil.
What length should the coil would be sufficient? Calculation in SI units


Tell me what else info you need?

What formulae do you know that may help?

Offline clingch

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Re: Chemical Engineering - pipe sizing
« Reply #2 on: January 30, 2013, 12:53:10 AM »
you should cal. the heat duty of this drum through energy balance , and then cal. the area of the coil according this equ.KADTM=Q,then according TO A=PI.D.L,THEN THE d and l is available.
 

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: Chemical Engineering - pipe sizing
« Reply #3 on: January 30, 2013, 02:44:58 AM »

a heating tank ( approx 1.2m tall and 0.86m Diameter) will have a flow of 1000kg per hour of vegetable oil running through. It needs heating of 50 to 65 deg. With about 3 bar steam running through the heating coil.
What length should the coil would be sufficient? Calculation in SI units


10 metres.

Will you trust my answer?

Sponsored Links