March 28, 2024, 01:49:21 PM
Forum Rules: Read This Before Posting


Topic: Tips from removing DMF from a sample?  (Read 16063 times)

0 Members and 1 Guest are viewing this topic.

Offline Adamcp898

  • Regular Member
  • ***
  • Posts: 30
  • Mole Snacks: +2/-0
Re: Tips from removing DMF from a sample?
« Reply #15 on: May 02, 2013, 12:07:56 PM »
It should come off on the rot. evap. if the pressure on yours goes to close to 0 mbar. Turn the water bath up to ~70oC and add a *Ignore me, I am impatient* trap between your flask and the rot. evap. itself, under those conditions it should be pulled as far as the *Ignore me, I am impatient* trap at least before condensing. But make sure others don't mind you using the rot. evap. under those elevated conditions and wash it afterwards if for nothing else than to get rid of the smell.

And would someone like to tell me why the post was edited? Would have been nice to at least have been informed..

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27636
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Tips from removing DMF from a sample?
« Reply #16 on: May 02, 2013, 02:00:39 PM »
This is automatic. Kind of an easter egg. One day I might dig into the details and remove it.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline opsomath

  • Chemist
  • Full Member
  • *
  • Posts: 472
  • Mole Snacks: +50/-8
Re: Tips from removing DMF from a sample?
« Reply #17 on: May 02, 2013, 02:14:04 PM »
LOL...I thought that "Ignore me, I am impatient trap" is a pretty good description of the role of the, errr, blump trap, in  this description.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27636
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: Tips from removing DMF from a sample?
« Reply #18 on: May 02, 2013, 03:20:59 PM »
I admit I had to check what was the word that was replaced. "bumр" is being censored as it is usually used by people bumрing their threads that didn't get an answer yet.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Adamcp898

  • Regular Member
  • ***
  • Posts: 30
  • Mole Snacks: +2/-0
Re: Tips from removing DMF from a sample?
« Reply #19 on: May 02, 2013, 05:06:45 PM »
This is automatic. Kind of an easter egg. One day I might dig into the details and remove it.

Bahahaha now I get it  ;D Feel a bit silly now actually too  :-[

Sponsored Links