March 29, 2024, 06:42:46 AM
Forum Rules: Read This Before Posting


Topic: Volume of a solution  (Read 4930 times)

0 Members and 1 Guest are viewing this topic.

Tom

  • Guest
Volume of a solution
« on: July 01, 2004, 04:35:30 PM »
The basic solution, MnO4 ¯ oxidizes NO2¯ to NO3¯ and is reduced to MnO2.  What volume of 0.10 M KmnO4 would be needed to oxidize 30ml of a 0.10 M NaNO2 solution?

My conclusion came out that it would require 40ml of solution, does that sound logical? Again the all the numbers are subscripted other than the 0.10M and 30ml.

Thanks

Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re:Volume of a solution
« Reply #1 on: July 01, 2004, 05:54:31 PM »
I suggest starting by writing the balanced chemical equation.
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

Tom

  • Guest
Re:Volume of a solution
« Reply #2 on: July 02, 2004, 11:22:10 AM »
I used this formula

D=M divided by V

Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re:Volume of a solution
« Reply #3 on: July 03, 2004, 03:56:45 PM »
I don't think that'll do it. You'll have to write the balanced chemical formula.
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

Sponsored Links