March 29, 2024, 09:48:33 AM
Forum Rules: Read This Before Posting


Topic: Mitsonobu Reaction - Air/Water Sensitive  (Read 5497 times)

0 Members and 1 Guest are viewing this topic.

Offline baum0372

  • Regular Member
  • ***
  • Posts: 38
  • Mole Snacks: +3/-0
  • Gender: Male
Mitsonobu Reaction - Air/Water Sensitive
« on: November 01, 2013, 12:59:31 PM »
I have looked into the literature but I'm having a hard time figuring out whether this is air or water sensitive.  I think that the water should eliminate to form hydrazine or ethanol relatively quickly but I am not sure?

Also, is the addition of reagents important?  I've heard of someone adding the alcohol last who got good results.  Thanks!

Offline Doc Oc

  • Chemist
  • Full Member
  • *
  • Posts: 564
  • Mole Snacks: +48/-12
Re: Mitsonobu Reaction - Air/Water Sensitive
« Reply #1 on: November 08, 2013, 09:02:32 AM »
In my experience, you do want to exclude air and water, but you don't need to be particularly rigorous.  No distilling of solvents or blowing nitrogen or argon into the reaction.  The biggest issue I ran into was using old triphenylphosphine, because it oxidizes over time, so you need to add more than you think to compensate.  Incidentally, getting rid of triphenylphosphine oxide is why I hate Mitsunobu (and other TPPO generating) reactions.

Order of addition is important, because you need to activate the DEAD/DIAD/whatever you use.  PPh3 and azadicarboxylate first, then your substrate, nucleophile goes in last.

Sponsored Links