March 28, 2024, 03:41:10 PM
Forum Rules: Read This Before Posting


Topic: Wet Tensile Strength  (Read 3807 times)

0 Members and 1 Guest are viewing this topic.

Offline angie07

  • Very New Member
  • *
  • Posts: 1
  • Mole Snacks: +0/-0
Wet Tensile Strength
« on: January 13, 2015, 10:24:16 PM »
I am trying to determine the wet tensile strength for tissue fibers in units of pounds per ton. All I know is that a wet-strength resin is added to the tissue fibers and is present in an amount of at least 0.1 dry weight percent.

Is there enough information to do this conversion? Or what other information would be required?

Since 0.1 is a percent, do I simply multiply 0.001 by 2000 (since there are 2000 pounds in a ton)?

Offline mjc123

  • Chemist
  • Sr. Member
  • *
  • Posts: 2048
  • Mole Snacks: +296/-12
Re: Wet Tensile Strength
« Reply #1 on: January 14, 2015, 04:51:53 AM »
There are 2240 pounds in a ton. 0.1% is 2.24 pounds/ton. That is the resin content. It doesn't tell you the tensile strength. You'd have to measure that.

Offline billnotgatez

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 4399
  • Mole Snacks: +223/-62
  • Gender: Male
Re: Wet Tensile Strength
« Reply #2 on: January 14, 2015, 05:57:57 AM »
Oh My

From
http://www.answers.com/Q/How_many_pounds_equal_a_ton
Quote
There are 2,000 pounds in a US ton.
In the UK, a ton is equal to 2,240 pounds.

From WIKI
http://en.wikipedia.org/wiki/Ton
Quote
Ton
From Wikipedia, the free encyclopedia
Not to be confused with Tonnage or Tonne.
For other uses, see Ton (disambiguation).

The ton is a unit of measure. It has a long history and has acquired a number of meanings and uses over the years. It is used principally as a unit of mass, and as a unit of volume. It can also be used as a measure of energy, for truck classification, or as a colloquial term.

It is derived from the tun, the term applied to a barrel of the largest size. This could contain a volume between 210 and 256 US gallons (790 and 970 L; 175 and 213 imp gal), which could weigh around 2,000 pounds (910 kg) and occupy some 60 cubic feet (1.7 m3) of space.[1]

In the United Kingdom the ton is defined as 2,240 pounds (1,016 kg) (avoirdupois pounds).[2] From 1965 the UK embarked upon a programme of metrication and gradually introduced metric units, including the tonne (metric ton), defined as 1000 kg. The UK Weights and Measures Act 1985 explicitly excluded from use for trade many units and terms, including the ton and the term "metric ton" for "tonne".[3]

In the United States and formerly Canada[4] a ton is defined to be 2,000 pounds (907 kg).

Where confusion is possible, the 2240 lb ton is called "long ton" and the 2000 lb ton "short ton"; the tonne is distinguished by its spelling, but usually pronounced the same as ton, hence the US term "metric ton". In the UK the final "e" of "tonne" can also be pronounced (/ˈtʌnɪ/),[5] or "metric ton" when it is necessary to make the distinction.

Where accuracy is required the correct term must be used, but for many purposes this is not necessary: the metric and long tons differ by only 1.6%, and the short ton is within 11% of both. The ton is the heaviest unit of weight referred to in colloquial speech.

The term "ton" is also used to refer to a number of units of volume, ranging from 35 to 100 cubic feet (0.99 to 2.83 m3) in capacity.

It can also be used as a unit of energy, expressed as an equivalent of coal burnt or TNT detonated.

In refrigeration, a ton is a unit of power. It is the power required to melt or freeze one short ton of ice per day. The refrigeration ton·hour is a unit of energy, the energy required to melt or freeze 1⁄24 short ton of ice.



Offline mjc123

  • Chemist
  • Sr. Member
  • *
  • Posts: 2048
  • Mole Snacks: +296/-12
Re: Wet Tensile Strength
« Reply #3 on: January 14, 2015, 06:39:52 AM »
Well, now you know where I come from.
All the more reason for using a relative measure like 0.1%.
But it's still not a measure of tensile strength.

Sponsored Links