April 22, 2019, 04:32:02 AM
Forum Rules: Read This Before Posting


Topic: TiO2: Gloss measurement question  (Read 1544 times)

0 Members and 1 Guest are viewing this topic.

Offline Henry_H

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
TiO2: Gloss measurement question
« on: April 03, 2015, 06:41:01 PM »
I have a quick technical question. My goal is to increase the gloss of the Rutile at 60 degrees.

My attempted solution is
1. To modify the process, I assume I could lower the temperature during the coating process or the drying process ( for sulphate process).
2. Or I could increase the Al2O3 coating percentage to enhance dispersion to create space particle.

Anyone who has more experienced got a better idea on this? Thanks.

Offline zouchao211

  • Very New Member
  • *
  • Posts: 1
  • Mole Snacks: +0/-0
Re: TiO2: Gloss measurement question
« Reply #1 on: May 27, 2015, 12:32:27 AM »
I have a quick technical question. My goal is to increase the gloss of the Rutile at 60 degrees.

My attempted solution is
1. To modify the process, I assume I could lower the temperature during the coating process or the drying process ( for sulphate process).
2. Or I could increase the Al2O3 coating percentage to enhance dispersion to create space particle.

Anyone who has more experienced got a better idea on this? Thanks.
I have book about this ,but i did not do this study.if you need that book,  yes ,you can  e-mail me at  mail address removed according to forum rules
« Last Edit: May 27, 2015, 12:53:56 AM by billnotgatez »

Sponsored Links