March 28, 2024, 12:04:06 PM
Forum Rules: Read This Before Posting


Topic: Working out composition of SeFe0x  (Read 2364 times)

0 Members and 1 Guest are viewing this topic.

Offline bmu123

  • Regular Member
  • ***
  • Posts: 31
  • Mole Snacks: +0/-0
Working out composition of SeFe0x
« on: April 25, 2015, 01:01:14 PM »
A sample of the perovskite SrFeOx (A) was synthesised by heating SrCO3 and Fe2O3 in oxygen gas at 900°C.  X-ray powder diffraction data revealed a primitive unit cell for A consistent with the perovskite structure.  A small sample of A was dissolved in dilute HCl containing excess KI, and the iodine produced (corresponding to reduction of Fe(IV) to Fe(III)) was titrated with sodium thiosulphate.  The titration indicated that 72% of the iron was present as Fe(IV)

I'm confused about how to work out the composition of A from this, I know 72% of the iron is Fe3+ so 28% must be Fe3+, this makes the average Fe oxidation state 3.72+, where do I go from here? Would it be SrFeO2.86 because the overall positive charge is now +5.72 so /2 for number of oxygens needed to balance it out?

X-ray diffraction revealed that A has a primitive unit cell with length 3.898 Å.  Explain the difference between the unit cell size of A and that of SrFeO3, which has a = 3.852 Å.

I assume this has something to do with the charges but I'm not sure what.

Offline unsu

  • Regular Member
  • ***
  • Posts: 65
  • Mole Snacks: +8/-0
Re: Working out composition of SeFe0x
« Reply #1 on: April 25, 2015, 02:35:17 PM »
72%, is it a mass % or mole %?




Offline bmu123

  • Regular Member
  • ***
  • Posts: 31
  • Mole Snacks: +0/-0
Re: Working out composition of SeFe0x
« Reply #2 on: April 27, 2015, 01:09:52 PM »
72%, is it a mass % or mole %?




hmm that's the full question it doesn't say which

Sponsored Links