March 28, 2024, 05:56:14 AM
Forum Rules: Read This Before Posting


Topic: SMPO Process: Hydroperoxide for Epoxidation  (Read 5343 times)

0 Members and 1 Guest are viewing this topic.

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
SMPO Process: Hydroperoxide for Epoxidation
« on: April 19, 2016, 02:24:13 AM »
In the well established SMPO process the following reaction is key, where a hydroperoxide intermediate is used for epoxidation of propylene, while itself getting converted to the corresponding alcohol. Yields are greater than 90%. Please correct me if I am wrong:

c1ccccc1C(OO)C.C=CC>>c1ccccc1C(O)C.C1OC1C

Would it be possible to use the same hydroperoxide for the following epoxidation?

c1ccccc1C(OO)C.c1ccccc1C=C>>c1ccccc1C(O)C.c1ccccc1C2OC2

Thoughts? Is this worth a shot or likely to be a dud for fundamental reasons?

Offline discodermolide

  • Chemist
  • Sr. Member
  • *
  • Posts: 5038
  • Mole Snacks: +405/-70
  • Gender: Male
    • My research history
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #1 on: April 19, 2016, 02:36:49 AM »
No reason why it should not work. Get into the lab and try it out.
Have you checked SciFinder for this reaction to make styrene epoxide, it may well be patented.
Development Chemists do it on Scale, Research Chemists just do it!
My Research History

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #2 on: April 19, 2016, 03:42:39 AM »
Thanks @disco.

I didn't find any blocking patents. So perhaps it just does not work well? Poor yields maybe?

Offline orgopete

  • Chemist
  • Sr. Member
  • *
  • Posts: 2636
  • Mole Snacks: +213/-71
    • Curved Arrow Press
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #3 on: April 19, 2016, 08:08:12 AM »
Is that an easy separation after the reaction is complete?
Author of a multi-tiered example based workbook for learning organic chemistry mechanisms.

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #4 on: April 19, 2016, 08:28:21 AM »
Is that an easy separation after the reaction is complete?

May not be "easy" but seems not onerous. BP difference is 10 C. With a vacuum this may change, though.

Experimental MP difference is 55 C! So, I suppose one could try differential crystallization but that's more messy.

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #5 on: April 19, 2016, 09:12:47 AM »
What other "carrier" hydroperoxide molecules come to mind?

I am not tied to using this one. Would any other be cheaper / work better?

Offline discodermolide

  • Chemist
  • Sr. Member
  • *
  • Posts: 5038
  • Mole Snacks: +405/-70
  • Gender: Male
    • My research history
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #6 on: April 19, 2016, 11:05:30 AM »
Cumene hydroperoxide sprang into my mind. I guess hydroperoxides of similar structure would also do the same chemistry.
Think of the equivalent naphthyl:
CC(OO)C1=CC2=CC=CC=C2C=C1
Might even be easier to separate?
Development Chemists do it on Scale, Research Chemists just do it!
My Research History

Offline Guitarmaniac86

  • Full Member
  • ****
  • Posts: 237
  • Mole Snacks: +31/-2
  • Gender: Male
  • Medicinal Chemist
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #7 on: April 19, 2016, 12:38:06 PM »
I've used mCPBA (meta chloro peroxybenzoic acid) for these kind of transformations because its cheap. Didn't really care if it was the most efficient or best reagent for the job, just cheap. I don't know if this is the answer you were looking for though.

I've used it to make epoxides and to oxidise sulfur atoms in thioethers
Don't believe atoms, they make up everything!

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #8 on: April 19, 2016, 01:44:16 PM »
Cumene hydroperoxide sprang into my mind. I guess hydroperoxides of similar structure would also do the same chemistry.


I considered cumene hydroperoxide too, because of its wide commercial application in Acetone / Phenol production.

But isn't cumene hydroperoxide prone to splitting up via the Hock Rearrangement? If it splits up it won't be available to epoxidate the double bond?

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #9 on: April 19, 2016, 01:54:28 PM »
I've used mCPBA (meta chloro peroxybenzoic acid) for these kind of transformations because its cheap. Didn't really care if it was the most efficient or best reagent for the job, just cheap. I don't know if this is the answer you were looking for though.

Thanks! I will look into it.

Problem is one of cost: Ethylbenzene & Cumene are both  available at less than $1 per kg. Air oxidation gets you the hydroperoxide.


I doubt that mCPBA can be obtained at anywhere close to this price point? Perhaps I am wrong.

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #10 on: April 19, 2016, 01:57:11 PM »
Cumene hydroperoxide sprang into my mind. I guess hydroperoxides of similar structure would also do the same chemistry.

I found out that Cumene hydroperoxide is actually sold as an initiator for polymerization of Styrene. As Trigonox.

http://www.pcpds.akzonobel.com/PolymerChemicalsPDS/showPDF.aspx?pds_id=178

Ergo, we have polymerization competing with epoxidation and probably overwhelming epoxidation?

Offline discodermolide

  • Chemist
  • Sr. Member
  • *
  • Posts: 5038
  • Mole Snacks: +405/-70
  • Gender: Male
    • My research history
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #11 on: April 19, 2016, 02:20:13 PM »
That reaction is certainly dependent upon the temperature, so you may get it to epoxidise before it polymerises?
Development Chemists do it on Scale, Research Chemists just do it!
My Research History

Offline curiouscat

  • Chemist
  • Sr. Member
  • *
  • Posts: 3006
  • Mole Snacks: +121/-35
Re: SMPO Process: Hydroperoxide for Epoxidation
« Reply #12 on: April 19, 2016, 02:26:48 PM »
That reaction is certainly dependent upon the temperature, so you may get it to epoxidise before it polymerises?

True. It could work.

On the other hand, the Trigonox Application Note says this:

"Without accelerators effective polymerization can be obtained in the 50-200 C Range. For example, Styrene and methyl methacrylate can be polymerized in bulk at 60-100 C"

So, looks like one would have to work below at least 60 C for epoxidation selectivity to prevail. Of course, at low T rates are a different issue. 

Sponsored Links