December 11, 2024, 11:15:21 PM
Forum Rules: Read This Before Posting


Topic: Separating DMSO from DMSO-Water Solution  (Read 6368 times)

0 Members and 1 Guest are viewing this topic.

Offline wolfpackengineer

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Separating DMSO from DMSO-Water Solution
« on: May 08, 2017, 02:12:40 PM »
My facility works with a high volume of DMSO-Water solution, where the DMSO concentration is only about 2% of the liquid (other 98% is DI water). We want to responsibly dispose of the DMSO, but removing such a high volume of liquid is costly. Does anybody have recommendations for how to potentially concentrate the DMSO and separate it from the DI water? By having a higher concentration, the amount of volume we would have to remove could be greatly reduced.

Any thought or recommendations are greatly appreciated!

Offline Arkcon

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7367
  • Mole Snacks: +533/-147
Re: Separating DMSO from DMSO-Water Solution
« Reply #1 on: May 08, 2017, 04:54:08 PM »
Distilling that much water is going to be energy intensive, therefore expensive.  I don't know if there's some sort of misting under vacuum apparatus that can help, but its likely capital expensive.

What your left with is process controls -- what can you change so this solvent isn't so diluted in water so that your waste is easier to discard or cheaper to remediate.
Hey, I'm not judging.  I just like to shoot straight.  I'm a man of science.

Offline ramana143

  • Regular Member
  • ***
  • Posts: 9
  • Mole Snacks: +0/-0
Re: Separating DMSO from DMSO-Water Solution
« Reply #2 on: May 09, 2017, 08:00:50 AM »
Add THF to this solution. THF and water forms azeotrope at 65°c. After the distillation you can get the pure DMSO because of it has the boling point of 189°c.

Offline wolfpackengineer

  • Very New Member
  • *
  • Posts: 2
  • Mole Snacks: +0/-0
Re: Separating DMSO from DMSO-Water Solution
« Reply #3 on: May 10, 2017, 08:55:00 AM »
Thank you for the recommendations. Yes the energy consumption is an issue for distilling the mixture, but if it is cheaper than frequently removing a high volume of liquid then it is certainly a potential option.

As far as THF, this is an interesting idea. However, wouldn't evaporating the THF pose a possible hazardous waste concern?

Thanks again for the replies.

Offline Enthalpy

  • Chemist
  • Sr. Member
  • *
  • Posts: 4036
  • Mole Snacks: +304/-59
Re: Separating DMSO from DMSO-Water Solution
« Reply #4 on: May 10, 2017, 12:48:57 PM »
If sunlight is reliable enough where you work, it can provide cheap heat. Fractional distillation, using the heat several times, needs only pumps for the liquids, especially of done at >1atm.

Degrading the DMSO in water with an oxidizer, UV and photocatalysts, or both, looks like the standard method:
http://www.tandfonline.com/doi/abs/10.1080/01919510701573418?journalCode=bose20
maybe some CaO finishes the job. I ignore whether some intermediates are toxic.

Offline Enthalpy

  • Chemist
  • Sr. Member
  • *
  • Posts: 4036
  • Mole Snacks: +304/-59
Re: Separating DMSO from DMSO-Water Solution
« Reply #5 on: May 11, 2017, 02:31:11 PM »
Reverse osmosis of course
https://en.wikipedia.org/wiki/Reverse_osmosis
especially if the mixture is (or can be made) reasonably clean.

The operation only needs pressure, <100bar, which consumes less than 1/200 of the power needed to evaporate water.

Sponsored Links