March 29, 2024, 10:28:06 AM
Forum Rules: Read This Before Posting


Topic: A question about elements that are under Argon  (Read 8798 times)

0 Members and 1 Guest are viewing this topic.

Offline CGB_Spender

  • Regular Member
  • ***
  • Posts: 22
  • Mole Snacks: +1/-5
  • Gender: Male
A question about elements that are under Argon
« on: June 20, 2006, 02:40:01 PM »
I see that many compnies that sell elements, they put them in an ampoule, under Argon for avoid oxidation. My question is why ONLY under Argon? Are any other gases that have the same results with Argon, against oxidation? Why they put them under Argon and they dont put the elements,in an amboulle that has not atmospheric air at all. Without atmospheric air, you have not the danger of oxidation, and you save money. Thanks.? :)

Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re: A question about elements that are under Argon
« Reply #1 on: June 20, 2006, 02:47:53 PM »
Argon is the most abundant noble gas, so it makes sense in that respect.
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

Offline CGB_Spender

  • Regular Member
  • ***
  • Posts: 22
  • Mole Snacks: +1/-5
  • Gender: Male
Re: A question about elements that are under Argon
« Reply #2 on: June 20, 2006, 02:53:19 PM »
Ok, i understand why they use Argon and not other noble gases, BUT why not in an ampoule without atmosperic air at all ?  ??? This would be cheaper and you solve the problem of oxidation once for all.

Offline Borek

  • Mr. pH
  • Administrator
  • Deity Member
  • *
  • Posts: 27635
  • Mole Snacks: +1799/-410
  • Gender: Male
  • I am known to be occasionally wrong.
    • Chembuddy
Re: A question about elements that are under Argon
« Reply #3 on: June 20, 2006, 03:51:47 PM »
No, it is not cheaper nor easier to seal the glass ampoule in vacuum. It can be done, but it is much easier and much more (economically) feasible to use inert atmosphere of the same pressure as external when doing such things.
ChemBuddy chemical calculators - stoichiometry, pH, concentration, buffer preparation, titrations.info

Offline Donaldson Tan

  • Editor, New Asia Republic
  • Retired Staff
  • Sr. Member
  • *
  • Posts: 3177
  • Mole Snacks: +261/-13
  • Gender: Male
    • New Asia Republic
Re: A question about elements that are under Argon
« Reply #4 on: June 21, 2006, 07:47:58 PM »
You are suggesting to use a vacuum inside the glass bulb instead of using an inert gas. This would be mechanically unstable for the glass bulb. You might need thicker glass to compensate for atmospheric pressure acting on the bulb.

Nitrogen gas is an alternative to Argon FYI.
"Say you're in a [chemical] plant and there's a snake on the floor. What are you going to do? Call a consultant? Get a meeting together to talk about which color is the snake? Employees should do one thing: walk over there and you step on the friggin� snake." - Jean-Pierre Garnier, CEO of Glaxosmithkline, June 2006

Offline limpet chicken

  • mad scientist
  • Full Member
  • ****
  • Posts: 750
  • Mole Snacks: +49/-27
  • Gender: Male
  • Vote Limpet for supreme emperor of the new order
Re: A question about elements that are under Argon
« Reply #5 on: July 01, 2006, 08:58:40 AM »
Geo, it depends whats being stored under there, Li metal for example, will react with N2, to form, surprisingly enough, lithium nitride ;D

Activated, monatomic nitrogen is another matter, produced by passing N2 through a tube with a corona discharge, produces explosive nitrides from some transition metals, and is reactive as hell.
The light blinds
So behold darkness as our new light
In our darkness we can see
So with others blindness
We take flight.

Offline Donaldson Tan

  • Editor, New Asia Republic
  • Retired Staff
  • Sr. Member
  • *
  • Posts: 3177
  • Mole Snacks: +261/-13
  • Gender: Male
    • New Asia Republic
Re: A question about elements that are under Argon
« Reply #6 on: July 21, 2006, 02:17:20 PM »
Yes, nitrogen gas is not employed for storing group 1 metal.

the concept is to provide an inert and a mechanically stable environment.
"Say you're in a [chemical] plant and there's a snake on the floor. What are you going to do? Call a consultant? Get a meeting together to talk about which color is the snake? Employees should do one thing: walk over there and you step on the friggin� snake." - Jean-Pierre Garnier, CEO of Glaxosmithkline, June 2006

Sponsored Links