March 28, 2024, 09:20:02 AM
Forum Rules: Read This Before Posting


Topic: Variac  (Read 4018 times)

0 Members and 1 Guest are viewing this topic.

Offline zsinger7

  • Regular Member
  • ***
  • Posts: 9
  • Mole Snacks: +0/-0
Variac
« on: April 22, 2018, 05:48:04 AM »
All,
Dumb newbie question, I just haven't purchased said item in so long.  Hotplate finally bit the dust.  Got a new heating mantle/stirrer.  It says it has "temperature control", but that kind of sounds like an alcoholic swearing to drunk he's not god...Variac MANDATORY in all mantles, no?
      -Zack

Offline Arkcon

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7367
  • Mole Snacks: +533/-147
Re: Variac
« Reply #1 on: April 22, 2018, 07:50:42 AM »
Hey, I'm not judging.  I just like to shoot straight.  I'm a man of science.

Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re: Variac
« Reply #2 on: April 23, 2018, 02:05:15 PM »
It should be. Can you take a picture of it and the plugs so we can see?
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

Offline zsinger7

  • Regular Member
  • ***
  • Posts: 9
  • Mole Snacks: +0/-0
Re: Variac
« Reply #3 on: April 26, 2018, 09:12:29 AM »
Arkon- Stop being an internet loser and assuming I haven't researched it.  Sound like a plan? 

Offline wildfyr

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 1771
  • Mole Snacks: +203/-10
Re: Variac
« Reply #4 on: April 26, 2018, 10:21:24 AM »
Theres no need to be an ass to our mod. Literally all the info you provided is that you bought a "hot plate with a temperature control." We have only a minimal idea of who you are an what your experience is. And modern hot plates do not usually use Variacs.

This one for instance, would plug right into the wall (https://us.vwr.com/store/product/7930031/vwr-professional-round-top-hotplate-stirrers).  I only use variacs on the oldest of hotplates in my life, because they obviously won't even perform without it.

Modern ones typically have a steel or teflon-coated steel temperature probe that plugs in the back that regulates temperature. If you unplug the probe then it will try to base the temperature on the surface, but this usually gives poor regulation and is workable only for refluxing. Maybe there are other labs around and you can see their setup with modern hotplates to reassure yourself?

Offline Mitch

  • General Chemist
  • Administrator
  • Sr. Member
  • *
  • Posts: 5298
  • Mole Snacks: +376/-3
  • Gender: Male
  • "I bring you peace." -Mr. Burns
    • Chemistry Blog
Re: Variac
« Reply #5 on: April 26, 2018, 12:07:34 PM »
He said he had a heating mantle. Although, the newer ones can be plugged into the wall.
« Last Edit: April 27, 2018, 08:39:10 AM by Mitch »
Most Common Suggestions I Make on the Forums.
1. Start by writing a balanced chemical equation.
2. Don't confuse thermodynamic stability with chemical reactivity.
3. Forum Supports LaTex

Offline wildfyr

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 1771
  • Mole Snacks: +203/-10
Re: Variac
« Reply #6 on: April 27, 2018, 08:28:08 AM »
I stand corrected. He did say heating mantle. Just curious, why would you get one a mantle over a hotplate/stirrer? Its less versatile.

Offline zsinger7

  • Regular Member
  • ***
  • Posts: 9
  • Mole Snacks: +0/-0
Re: Variac
« Reply #7 on: May 04, 2018, 02:35:20 PM »
I like heating mantles better. 

Anyways, the answer (as I have found) is NO, variac is 100% not necessary!  It actually hurt the stirring capability of my mantle.....and the mantle I got (Made by Faithful) can stir with BIG RPMs!

« Last Edit: May 04, 2018, 03:28:58 PM by billnotgatez »

Sponsored Links