Forum Rules: Read This Before Posting


Topic: Removing Tin products in Stille coupling  (Read 2402 times)

0 Members and 1 Guest are viewing this topic.

Offline vikram

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +1/-0
Removing Tin products in Stille coupling
« on: September 23, 2018, 07:39:16 AM »
Do anyone have better idea to remove tin products in stille coupling?I have tried celite filtration and aqueous workup,however its not very efficient >:(

Its like a tar which is problematic during column chromatography.

Offline wildfyr

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 1155
  • Mole Snacks: +130/-9
Re: Removing Tin products in Stille coupling
« Reply #1 on: September 23, 2018, 08:58:06 AM »
Have you tried just putting it through a plug of silica instead of running a full column? This is a good way to get rid of salts

Offline phth

  • Chemist
  • Full Member
  • *
  • Posts: 431
  • Mole Snacks: +32/-4
Re: Removing Tin products in Stille coupling
« Reply #2 on: September 24, 2018, 02:46:12 AM »
Have you tried just putting it through a plug of silica instead of running a full column? This is a good way to get rid of salts

Filter thru celite +Na/K•F(s)

Offline vikram

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +1/-0
Re: Removing Tin products in Stille coupling
« Reply #3 on: September 24, 2018, 06:07:12 AM »
Have you tried just putting it through a plug of silica instead of running a full column? This is a good way to get rid of salts

@wildfyr you mean to say using Silica as a filtration setup and then again running a full column?

Offline vikram

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +1/-0
Re: Removing Tin products in Stille coupling
« Reply #4 on: September 24, 2018, 06:09:18 AM »

Filter thru celite +Na/K•F(s)

Can you please elaborate the method?

I am using CsF during the reaction. So Is KF/NaF needed?

Offline wildfyr

  • Global Moderator
  • Sr. Member
  • ***
  • Posts: 1155
  • Mole Snacks: +130/-9
Re: Removing Tin products in Stille coupling
« Reply #5 on: December 05, 2018, 11:14:58 AM »
Sorry for the late response, missed it. yes that is what I meant.

Offline rolnor

  • Full Member
  • ****
  • Posts: 486
  • Mole Snacks: +37/-3
Re: Removing Tin products in Stille coupling
« Reply #6 on: December 05, 2018, 01:58:13 PM »
If product is reasonable polar you can dissolve mixture in acetonitrile and wash with hexane to remove tin-organic.
If lipophilic you can dissolve in solvent and wash with KF och NaF-water solution.

Offline clarkstill

  • Chemist
  • Full Member
  • *
  • Posts: 377
  • Mole Snacks: +66/-4
Re: Removing Tin products in Stille coupling
« Reply #7 on: December 06, 2018, 03:17:18 AM »
Run your column in 10% K2CO3 in silica:

https://pubs.rsc.org/en/content/articlepdf/2010/cc/c0cc01328e?page=search

Works like a dream

Offline vikram

  • Regular Member
  • ***
  • Posts: 41
  • Mole Snacks: +1/-0
Re: Removing Tin products in Stille coupling
« Reply #8 on: December 06, 2018, 04:47:28 AM »
Run your column in 10% K2CO3 in silica:

https://pubs.rsc.org/en/content/articlepdf/2010/cc/c0cc01328e?page=search

Works like a dream

Thanks clarkstill. Its really great! Then during workup if I prepare a elite bed with potassium carbonate, it would help to remove both tin and Pd together right?I meant to say the column would be little less messy:)

(I usually obtain tar like polymerized tin compound after the reaction)

Offline zarhym

  • Full Member
  • ****
  • Posts: 116
  • Mole Snacks: +13/-1
  • Gender: Male
    • Linkedin
Re: Removing Tin products in Stille coupling
« Reply #9 on: December 08, 2018, 02:46:59 AM »
I would search stille coupling in OPRD journal. The reactions in this journal is often done in industrial scale (kilogram at least). I would be surprised if they are still doing columns at that scale.

Sponsored Links